/*

** 2004 April 13

**

** The author disclaims copyright to this source code.  In place of

** a legal notice, here is a blessing:

**

**    May you do good and not evil.

**    May you find forgiveness for yourself and forgive others.

**    May you share freely, never taking more than you give.

**

*************************************************************************

** This file contains routines used to translate between UTF-8, 

** UTF-16, UTF-16BE, and UTF-16LE.

**

** $Id$

**

** Notes on UTF-8:

**

**   Byte-0    Byte-1    Byte-2    Byte-3    Value

**  0xxxxxxx                                 00000000 00000000 0xxxxxxx

**  110yyyyy  10xxxxxx                       00000000 00000yyy yyxxxxxx

**  1110zzzz  10yyyyyy  10xxxxxx             00000000 zzzzyyyy yyxxxxxx

**  11110uuu  10uuzzzz  10yyyyyy  10xxxxxx   000uuuuu zzzzyyyy yyxxxxxx

**

**

** Notes on UTF-16:  (with wwww+1==uuuuu)

**

**      Word-0               Word-1          Value

**  110110ww wwzzzzyy   110111yy yyxxxxxx    000uuuuu zzzzyyyy yyxxxxxx

**  zzzzyyyy yyxxxxxx                        00000000 zzzzyyyy yyxxxxxx

**

**

** BOM or Byte Order Mark:

**     0xff 0xfe   little-endian utf-16 follows

**     0xfe 0xff   big-endian utf-16 follows

**

*/

#include "sqliteInt.h"

#include <assert.h>

#include "vdbeInt.h"

/*

** The following constant value is used by the SQLITE_BIGENDIAN and

** SQLITE_LITTLEENDIAN macros.

*/

const int sqlite3one = 1;

/*

** This lookup table is used to help decode the first byte of

** a multi-byte UTF8 character.

*/

const unsigned char sqlite3UtfTrans1[] = {

  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,

  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,

  0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,

  0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,

  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,

  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,

  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,

  0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00,

};

#define WRITE_UTF8(zOut, c) {                          \

  if( c<0x00080 ){                                     \

    *zOut++ = (c&0xFF);                                \

  }                                                    \

  else if( c<0x00800 ){                                \

    *zOut++ = 0xC0 + ((c>>6)&0x1F);                    \

    *zOut++ = 0x80 + (c & 0x3F);                       \

  }                                                    \

  else if( c<0x10000 ){                                \

    *zOut++ = 0xE0 + ((c>>12)&0x0F);                   \

    *zOut++ = 0x80 + ((c>>6) & 0x3F);                  \

    *zOut++ = 0x80 + (c & 0x3F);                       \

  }else{                                               \

    *zOut++ = 0xF0 + ((c>>18) & 0x07);                 \

    *zOut++ = 0x80 + ((c>>12) & 0x3F);                 \

    *zOut++ = 0x80 + ((c>>6) & 0x3F);                  \

    *zOut++ = 0x80 + (c & 0x3F);                       \

  }                                                    \

}

#define WRITE_UTF16LE(zOut, c) {                                \

  if( c<=0xFFFF ){                                              \

    *zOut++ = (c&0x00FF);                                       \

    *zOut++ = ((c>>8)&0x00FF);                                  \

  }else{                                                        \

    *zOut++ = (((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0));  \

    *zOut++ = (0x00D8 + (((c-0x10000)>>18)&0x03));              \

    *zOut++ = (c&0x00FF);                                       \

    *zOut++ = (0x00DC + ((c>>8)&0x03));                         \

  }                                                             \

}

#define WRITE_UTF16BE(zOut, c) {                                \

  if( c<=0xFFFF ){                                              \

    *zOut++ = ((c>>8)&0x00FF);                                  \

    *zOut++ = (c&0x00FF);                                       \

  }else{                                                        \

    *zOut++ = (0x00D8 + (((c-0x10000)>>18)&0x03));              \

    *zOut++ = (((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0));  \

    *zOut++ = (0x00DC + ((c>>8)&0x03));                         \

    *zOut++ = (c&0x00FF);                                       \

  }                                                             \

}

#define READ_UTF16LE(zIn, c){                                         \

  c = (*zIn++);                                                       \

  c += ((*zIn++)<<8);                                                 \

  if( c>=0xD800 && c<0xE000 ){                                       \

    int c2 = (*zIn++);                                                \

    c2 += ((*zIn++)<<8);                                              \

    c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10);   \

    if( (c & 0xFFFF0000)==0 ) c = 0xFFFD;                             \

  }                                                                   \

}

#define READ_UTF16BE(zIn, c){                                         \

  c = ((*zIn++)<<8);                                                  \

  c += (*zIn++);                                                      \

  if( c>=0xD800 && c<0xE000 ){                                       \

    int c2 = ((*zIn++)<<8);                                           \

    c2 += (*zIn++);                                                   \

    c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10);   \

    if( (c & 0xFFFF0000)==0 ) c = 0xFFFD;                             \

  }                                                                   \

}

/*

** If the TRANSLATE_TRACE macro is defined, the value of each Mem is

** printed on stderr on the way into and out of sqlite3VdbeMemTranslate().

*/ 

/* #define TRANSLATE_TRACE 1 */

#ifndef SQLITE_OMIT_UTF16

/*

** This routine transforms the internal text encoding used by pMem to

** desiredEnc. It is an error if the string is already of the desired

** encoding, or if *pMem does not contain a string value.

*/

int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){

  unsigned char zShort[NBFS]; /* Temporary short output buffer */

  int len;                    /* Maximum length of output string in bytes */

  unsigned char *zOut;                  /* Output buffer */

  unsigned char *zIn;                   /* Input iterator */

  unsigned char *zTerm;                 /* End of input */

  unsigned char *z;                     /* Output iterator */

  unsigned int c;

  assert( pMem->flags&MEM_Str );

  assert( pMem->enc!=desiredEnc );

  assert( pMem->enc!=0 );

  assert( pMem->n>=0 );

#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)

  {

    char zBuf[100];

    sqlite3VdbeMemPrettyPrint(pMem, zBuf);

    fprintf(stderr, "INPUT:  %s\n", zBuf);

  }

#endif

  /* If the translation is between UTF-16 little and big endian, then 

  ** all that is required is to swap the byte order. This case is handled

  ** differently from the others.

  */

  if( pMem->enc!=SQLITE_UTF8 && desiredEnc!=SQLITE_UTF8 ){

    u8 temp;

    int rc;

    rc = sqlite3VdbeMemMakeWriteable(pMem);

    if( rc!=SQLITE_OK ){

      assert( rc==SQLITE_NOMEM );

      return SQLITE_NOMEM;

    }

    zIn = (u8*)pMem->z;

    zTerm = &zIn[pMem->n];

    while( zIn<zTerm ){

      temp = *zIn;

      *zIn = *(zIn+1);

      zIn++;

      *zIn++ = temp;

    }

    pMem->enc = desiredEnc;

    goto translate_out;

  }

  /* Set len to the maximum number of bytes required in the output buffer. */

  if( desiredEnc==SQLITE_UTF8 ){

    /* When converting from UTF-16, the maximum growth results from

    ** translating a 2-byte character to a 4-byte UTF-8 character.

    ** A single byte is required for the output string

    ** nul-terminator.

    */

    len = pMem->n * 2 + 1;

  }else{

    /* When converting from UTF-8 to UTF-16 the maximum growth is caused

    ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16

    ** character. Two bytes are required in the output buffer for the

    ** nul-terminator.

    */

    len = pMem->n * 2 + 2;

  }

  /* Set zIn to point at the start of the input buffer and zTerm to point 1

  ** byte past the end.

  **

  ** Variable zOut is set to point at the output buffer. This may be space

  ** obtained from malloc(), or Mem.zShort, if it large enough and not in

  ** use, or the zShort array on the stack (see above).

  */

  zIn = (u8*)pMem->z;

  zTerm = &zIn[pMem->n];

  if( len>NBFS ){

    zOut = sqliteMallocRaw(len);

    if( !zOut ) return SQLITE_NOMEM;

  }else{

    zOut = zShort;

  }

  z = zOut;

  if( pMem->enc==SQLITE_UTF8 ){

    unsigned int iExtra = 0xD800;

    if( 0==(pMem->flags&MEM_Term) && zTerm>zIn && (zTerm[-1]&0x80) ){

      /* This UTF8 string is not nul-terminated, and the last byte is

      ** not a character in the ascii range (codpoints 0..127). This

      ** means the SQLITE_READ_UTF8() macro might read past the end

      ** of the allocated buffer.

      **

      ** There are four possibilities:

      **

      **   1. The last byte is the first byte of a non-ASCII character,

      **

      **   2. The final N bytes of the input string are continuation bytes

      **      and immediately preceding them is the first byte of a 

      **      non-ASCII character.

      **

      **   3. The final N bytes of the input string are continuation bytes

      **      and immediately preceding them is a byte that encodes a 

      **      character in the ASCII range.

      **

      **   4. The entire string consists of continuation characters.

      **

      ** Cases (3) and (4) require no special handling. The SQLITE_READ_UTF8()

      ** macro will not overread the buffer in these cases.

      */

      unsigned char *zExtra = &zTerm[-1];

      while( zExtra>zIn && (zExtra[0]&0xC0)==0x80 ){

        zExtra--;

      }

      if( (zExtra[0]&0xC0)==0xC0 ){

        /* Make a copy of the last character encoding in the input string.

        ** Then make sure it is nul-terminated and use SQLITE_READ_UTF8()

        ** to decode the codepoint. Store the codepoint in variable iExtra,

        ** it will be appended to the output string later.

        */

        unsigned char *zFree = 0;

        unsigned char zBuf[16];

        int nExtra = (pMem->n+zIn-zExtra);

        zTerm = zExtra;

        if( nExtra>15 ){

          zExtra = sqliteMallocRaw(nExtra+1);

          if( !zExtra ){

            return SQLITE_NOMEM;

          }

          zFree = zExtra;

        }else{

          zExtra = zBuf;

        }

        memcpy(zExtra, zTerm, nExtra);

        zExtra[nExtra] = '\0';

        SQLITE_READ_UTF8(zExtra, iExtra);

        sqliteFree(zFree);

      }

    }

    if( desiredEnc==SQLITE_UTF16LE ){

      /* UTF-8 -> UTF-16 Little-endian */

      while( zIn<zTerm ){

        SQLITE_READ_UTF8(zIn, c); 

        WRITE_UTF16LE(z, c);

      }

      if( iExtra!=0xD800 ){

        WRITE_UTF16LE(z, iExtra);

      }

    }else{

      assert( desiredEnc==SQLITE_UTF16BE );

      /* UTF-8 -> UTF-16 Big-endian */

      while( zIn<zTerm ){

        SQLITE_READ_UTF8(zIn, c); 

        WRITE_UTF16BE(z, c);

      }

      if( iExtra!=0xD800 ){

        WRITE_UTF16BE(z, iExtra);

      }

    }

    pMem->n = z - zOut;

    *z++ = 0;

  }else{

    assert( desiredEnc==SQLITE_UTF8 );

    if( pMem->enc==SQLITE_UTF16LE ){

      /* UTF-16 Little-endian -> UTF-8 */

      while( zIn<zTerm ){

        READ_UTF16LE(zIn, c); 

        WRITE_UTF8(z, c);

      }

    }else{

      /* UTF-16 Little-endian -> UTF-8 */

      while( zIn<zTerm ){

        READ_UTF16BE(zIn, c); 

        WRITE_UTF8(z, c);

      }

    }

    pMem->n = z - zOut;

  }

  *z = 0;

  assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len );

  sqlite3VdbeMemRelease(pMem);

  pMem->flags &= ~(MEM_Static|MEM_Dyn|MEM_Ephem|MEM_Short);

  pMem->enc = desiredEnc;

  if( zOut==zShort ){

    memcpy(pMem->zShort, zOut, len);

    zOut = (u8*)pMem->zShort;

    pMem->flags |= (MEM_Term|MEM_Short);

  }else{

    pMem->flags |= (MEM_Term|MEM_Dyn);

  }

  pMem->z = (char*)zOut;

translate_out:

#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)

  {

    char zBuf[100];

    sqlite3VdbeMemPrettyPrint(pMem, zBuf);

    fprintf(stderr, "OUTPUT: %s\n", zBuf);

  }

#endif

  return SQLITE_OK;

}

/*

** This routine checks for a byte-order mark at the beginning of the 

** UTF-16 string stored in *pMem. If one is present, it is removed and

** the encoding of the Mem adjusted. This routine does not do any

** byte-swapping, it just sets Mem.enc appropriately.

**

** The allocation (static, dynamic etc.) and encoding of the Mem may be

** changed by this function.

*/

int sqlite3VdbeMemHandleBom(Mem *pMem){

  int rc = SQLITE_OK;

  u8 bom = 0;

  if( pMem->n<0 || pMem->n>1 ){

    u8 b1 = *(u8 *)pMem->z;

    u8 b2 = *(((u8 *)pMem->z) + 1);

    if( b1==0xFE && b2==0xFF ){

      bom = SQLITE_UTF16BE;

    }

    if( b1==0xFF && b2==0xFE ){

      bom = SQLITE_UTF16LE;

    }

  }

  if( bom ){

    /* This function is called as soon as a string is stored in a Mem*,

    ** from within sqlite3VdbeMemSetStr(). At that point it is not possible

    ** for the string to be stored in Mem.zShort, or for it to be stored

    ** in dynamic memory with no destructor.

    */

    assert( !(pMem->flags&MEM_Short) );

    assert( !(pMem->flags&MEM_Dyn) || pMem->xDel );

    if( pMem->flags & MEM_Dyn ){

      void (*xDel)(void*) = pMem->xDel;

      char *z = pMem->z;

      pMem->z = 0;

      pMem->xDel = 0;

      rc = sqlite3VdbeMemSetStr(pMem, &z[2], pMem->n-2, bom, SQLITE_TRANSIENT);

      xDel(z);

    }else{

      rc = sqlite3VdbeMemSetStr(pMem, &pMem->z[2], pMem->n-2, bom, 

          SQLITE_TRANSIENT);

    }

  }

  return rc;

}

#endif /* SQLITE_OMIT_UTF16 */

/*

** pZ is a UTF-8 encoded unicode string. If nByte is less than zero,

** return the number of unicode characters in pZ up to (but not including)

** the first 0x00 byte. If nByte is not less than zero, return the

** number of unicode characters in the first nByte of pZ (or up to 

** the first 0x00, whichever comes first).

*/

int sqlite3Utf8CharLen(const char *zIn, int nByte){

  int r = 0;

  const u8 *z = (const u8*)zIn;

  const u8 *zTerm;

  if( nByte>=0 ){

    zTerm = &z[nByte];

  }else{

    zTerm = (const u8*)(-1);

  }

  assert( z<=zTerm );

  while( *z!=0 && z<zTerm ){

    SQLITE_SKIP_UTF8(z);

    r++;

  }

  return r;

}

#ifndef SQLITE_OMIT_UTF16

/*

** Convert a UTF-16 string in the native encoding into a UTF-8 string.

** Memory to hold the UTF-8 string is obtained from malloc and must be

** freed by the calling function.

**

** NULL is returned if there is an allocation error.

*/

char *sqlite3Utf16to8(const void *z, int nByte){

  Mem m;

  memset(&m, 0, sizeof(m));

  sqlite3VdbeMemSetStr(&m, z, nByte, SQLITE_UTF16NATIVE, SQLITE_STATIC);

  sqlite3VdbeChangeEncoding(&m, SQLITE_UTF8);

  assert( (m.flags & MEM_Term)!=0 || sqlite3MallocFailed() );

  assert( (m.flags & MEM_Str)!=0 || sqlite3MallocFailed() );

  return (m.flags & MEM_Dyn)!=0 ? m.z : sqliteStrDup(m.z);

}

/*

** pZ is a UTF-16 encoded unicode string. If nChar is less than zero,

** return the number of bytes up to (but not including), the first pair

** of consecutive 0x00 bytes in pZ. If nChar is not less than zero,

** then return the number of bytes in the first nChar unicode characters

** in pZ (or up until the first pair of 0x00 bytes, whichever comes first).

*/

int sqlite3Utf16ByteLen(const void *zIn, int nChar){

  unsigned int c = 1;

  char const *z = zIn;

  int n = 0;

  if( SQLITE_UTF16NATIVE==SQLITE_UTF16BE ){

    /* Using an "if (SQLITE_UTF16NATIVE==SQLITE_UTF16BE)" construct here

    ** and in other parts of this file means that at one branch will

    ** not be covered by coverage testing on any single host. But coverage

    ** will be complete if the tests are run on both a little-endian and 

    ** big-endian host. Because both the UTF16NATIVE and SQLITE_UTF16BE

    ** macros are constant at compile time the compiler can determine

    ** which branch will be followed. It is therefore assumed that no runtime

    ** penalty is paid for this "if" statement.

    */

    while( c && ((nChar<0) || n<nChar) ){

      READ_UTF16BE(z, c);

      n++;

    }

  }else{

    while( c && ((nChar<0) || n<nChar) ){

      READ_UTF16LE(z, c);

      n++;

    }

  }

  return (z-(char const *)zIn)-((c==0)?2:0);

}

#if defined(SQLITE_TEST)

/*

** Translate UTF-8 to UTF-8.

**

** This has the effect of making sure that the string is well-formed

** UTF-8.  Miscoded characters are removed.

**

** The translation is done in-place (since it is impossible for the

** correct UTF-8 encoding to be longer than a malformed encoding).

*/

int sqlite3Utf8To8(unsigned char *zIn){

  unsigned char *zOut = zIn;

  unsigned char *zStart = zIn;

  int c;

  while(1){

    SQLITE_READ_UTF8(zIn, c);

    if( c==0 ) break;

    if( c!=0xfffd ){

      WRITE_UTF8(zOut, c);

    }

  }

  *zOut = 0;

  return zOut - zStart;

}

#endif

#if defined(SQLITE_TEST)

/*

** This routine is called from the TCL test function "translate_selftest".

** It checks that the primitives for serializing and deserializing

** characters in each encoding are inverses of each other.

*/

void sqlite3UtfSelfTest(){

  unsigned int i, t;

  unsigned char zBuf[20];

  unsigned char *z;

  int n;

  unsigned int c;

  for(i=0; i<0x00110000; i++){

    z = zBuf;

    WRITE_UTF8(z, i);

    n = z-zBuf;

    z[0] = 0;

    z = zBuf;

    SQLITE_READ_UTF8(z, c);

    t = i;

    if( i>=0xD800 && i<=0xDFFF ) t = 0xFFFD;

    if( (i&0xFFFFFFFE)==0xFFFE ) t = 0xFFFD;

    assert( c==t );

    assert( (z-zBuf)==n );

  }

  for(i=0; i<0x00110000; i++){

    if( i>=0xD800 && i<0xE000 ) continue;

    z = zBuf;

    WRITE_UTF16LE(z, i);

    n = z-zBuf;

    z[0] = 0;

    z = zBuf;

    READ_UTF16LE(z, c);

    assert( c==i );

    assert( (z-zBuf)==n );

  }

  for(i=0; i<0x00110000; i++){

    if( i>=0xD800 && i<0xE000 ) continue;

    z = zBuf;

    WRITE_UTF16BE(z, i);

    n = z-zBuf;

    z[0] = 0;

    z = zBuf;

    READ_UTF16BE(z, c);

    assert( c==i );

    assert( (z-zBuf)==n );

  }

}

#endif /* SQLITE_TEST */

#endif /* SQLITE_OMIT_UTF16 */