/* gzio.c -- IO on .gz files

 * Copyright (C) 1995-2005 Jean-loup Gailly.

 * For conditions of distribution and use, see copyright notice in zlib.h

 *

 * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.

 */

/* @(#) $Id$ */

#include <stdio.h>

#include "zutil.h"

#ifdef NO_DEFLATE       /* for compatibility with old definition */

#  define NO_GZCOMPRESS

#endif

#ifndef NO_DUMMY_DECL

struct internal_state {int dummy;}; /* for buggy compilers */

#endif

#ifndef Z_BUFSIZE

#  ifdef MAXSEG_64K

#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */

#  else

#    define Z_BUFSIZE 16384

#  endif

#endif

#ifndef Z_PRINTF_BUFSIZE

#  define Z_PRINTF_BUFSIZE 4096

#endif

#ifdef __MVS__

#  pragma map (fdopen , "\174\174FDOPEN")

   FILE *fdopen(int, const char *);

#endif

#ifndef STDC

extern voidp  malloc OF((uInt size));

extern void   free   OF((voidpf ptr));

#endif

#define ALLOC(size) malloc(size)

#define TRYFREE(p) {if (p) free(p);}

static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */

/* gzip flag byte */

#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */

#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */

#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */

#define ORIG_NAME    0x08 /* bit 3 set: original file name present */

#define COMMENT      0x10 /* bit 4 set: file comment present */

#define RESERVED     0xE0 /* bits 5..7: reserved */

typedef struct gz_stream {

    z_stream stream;

    int      z_err;   /* error code for last stream operation */

    int      z_eof;   /* set if end of input file */

    FILE     *file;   /* .gz file */

    Byte     *inbuf;  /* input buffer */

    Byte     *outbuf; /* output buffer */

    uLong    crc;     /* crc32 of uncompressed data */

    char     *msg;    /* error message */

    char     *path;   /* path name for debugging only */

    int      transparent; /* 1 if input file is not a .gz file */

    char     mode;    /* 'w' or 'r' */

    z_off_t  start;   /* start of compressed data in file (header skipped) */

    z_off_t  in;      /* bytes into deflate or inflate */

    z_off_t  out;     /* bytes out of deflate or inflate */

    int      back;    /* one character push-back */

    int      last;    /* true if push-back is last character */

} gz_stream;

local gzFile gz_open      OF((const char *path, const char *mode, int  fd));

local int do_flush        OF((gzFile file, int flush));

local int    get_byte     OF((gz_stream *s));

local void   check_header OF((gz_stream *s));

local int    destroy      OF((gz_stream *s));

local void   putLong      OF((FILE *file, uLong x));

local uLong  getLong      OF((gz_stream *s));

/* ===========================================================================

     Opens a gzip (.gz) file for reading or writing. The mode parameter

   is as in fopen ("rb" or "wb"). The file is given either by file descriptor

   or path name (if fd == -1).

     gz_open returns NULL if the file could not be opened or if there was

   insufficient memory to allocate the (de)compression state; errno

   can be checked to distinguish the two cases (if errno is zero, the

   zlib error is Z_MEM_ERROR).

*/

local gzFile gz_open (path, mode, fd)

    const char *path;

    const char *mode;

    int  fd;

{

    int err;

    int level = Z_DEFAULT_COMPRESSION; /* compression level */

    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */

    char *p = (char*)mode;

    gz_stream *s;

    char fmode[80]; /* copy of mode, without the compression level */

    char *m = fmode;

    if (!path || !mode) return Z_NULL;

    s = (gz_stream *)ALLOC(sizeof(gz_stream));

    if (!s) return Z_NULL;

    s->stream.zalloc = (alloc_func)0;

    s->stream.zfree = (free_func)0;

    s->stream.opaque = (voidpf)0;

    s->stream.next_in = s->inbuf = Z_NULL;

    s->stream.next_out = s->outbuf = Z_NULL;

    s->stream.avail_in = s->stream.avail_out = 0;

    s->file = NULL;

    s->z_err = Z_OK;

    s->z_eof = 0;

    s->in = 0;

    s->out = 0;

    s->back = EOF;

    s->crc = crc32(0L, Z_NULL, 0);

    s->msg = NULL;

    s->transparent = 0;

    s->path = (char*)ALLOC(strlen(path)+1);

    if (s->path == NULL) {

        return destroy(s), (gzFile)Z_NULL;

    }

    strcpy(s->path, path); /* do this early for debugging */

    s->mode = '\0';

    do {

        if (*p == 'r') s->mode = 'r';

        if (*p == 'w' || *p == 'a') s->mode = 'w';

        if (*p >= '0' && *p <= '9') {

            level = *p - '0';

        } else if (*p == 'f') {

          strategy = Z_FILTERED;

        } else if (*p == 'h') {

          strategy = Z_HUFFMAN_ONLY;

        } else if (*p == 'R') {

          strategy = Z_RLE;

        } else {

            *m++ = *p; /* copy the mode */

        }

    } while (*p++ && m != fmode + sizeof(fmode));

    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;

    if (s->mode == 'w') {

#ifdef NO_GZCOMPRESS

        err = Z_STREAM_ERROR;

#else

        err = deflateInit2(&(s->stream), level,

                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);

        /* windowBits is passed < 0 to suppress zlib header */

        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);

#endif

        if (err != Z_OK || s->outbuf == Z_NULL) {

            return destroy(s), (gzFile)Z_NULL;

        }

    } else {

        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);

        err = inflateInit2(&(s->stream), -MAX_WBITS);

        /* windowBits is passed < 0 to tell that there is no zlib header.

         * Note that in this case inflate *requires* an extra "dummy" byte

         * after the compressed stream in order to complete decompression and

         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are

         * present after the compressed stream.

         */

        if (err != Z_OK || s->inbuf == Z_NULL) {

            return destroy(s), (gzFile)Z_NULL;

        }

    }

    s->stream.avail_out = Z_BUFSIZE;

    errno = 0;

    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);

    if (s->file == NULL) {

        return destroy(s), (gzFile)Z_NULL;

    }

    if (s->mode == 'w') {

        /* Write a very simple .gz header:

         */

        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],

             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);

        s->start = 10L;

        /* We use 10L instead of ftell(s->file) to because ftell causes an

         * fflush on some systems. This version of the library doesn't use

         * start anyway in write mode, so this initialization is not

         * necessary.

         */

    } else {

        check_header(s); /* skip the .gz header */

        s->start = ftell(s->file) - s->stream.avail_in;

    }

    return (gzFile)s;

}

/* ===========================================================================

     Opens a gzip (.gz) file for reading or writing.

*/

gzFile ZEXPORT gzopen (path, mode)

    const char *path;

    const char *mode;

{

    return gz_open (path, mode, -1);

}

/* ===========================================================================

     Associate a gzFile with the file descriptor fd. fd is not dup'ed here

   to mimic the behavio(u)r of fdopen.

*/

gzFile ZEXPORT gzdopen (fd, mode)

    int fd;

    const char *mode;

{

    char name[46];      /* allow for up to 128-bit integers */

    if (fd < 0) return (gzFile)Z_NULL;

    sprintf(name, "<fd:%d>", fd); /* for debugging */

    return gz_open (name, mode, fd);

}

/* ===========================================================================

 * Update the compression level and strategy

 */

int ZEXPORT gzsetparams (file, level, strategy)

    gzFile file;

    int level;

    int strategy;

{

    gz_stream *s = (gz_stream*)file;

    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;

    /* Make room to allow flushing */

    if (s->stream.avail_out == 0) {

        s->stream.next_out = s->outbuf;

        if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {

            s->z_err = Z_ERRNO;

        }

        s->stream.avail_out = Z_BUFSIZE;

    }

    return deflateParams (&(s->stream), level, strategy);

}

/* ===========================================================================

     Read a byte from a gz_stream; update next_in and avail_in. Return EOF

   for end of file.

   IN assertion: the stream s has been sucessfully opened for reading.

*/

local int get_byte(s)

    gz_stream *s;

{

    if (s->z_eof) return EOF;

    if (s->stream.avail_in == 0) {

        errno = 0;

        s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);

        if (s->stream.avail_in == 0) {

            s->z_eof = 1;

            if (ferror(s->file)) s->z_err = Z_ERRNO;

            return EOF;

        }

        s->stream.next_in = s->inbuf;

    }

    s->stream.avail_in--;

    return *(s->stream.next_in)++;

}

/* ===========================================================================

      Check the gzip header of a gz_stream opened for reading. Set the stream

    mode to transparent if the gzip magic header is not present; set s->err

    to Z_DATA_ERROR if the magic header is present but the rest of the header

    is incorrect.

    IN assertion: the stream s has already been created sucessfully;

       s->stream.avail_in is zero for the first time, but may be non-zero

       for concatenated .gz files.

*/

local void check_header(s)

    gz_stream *s;

{

    int method; /* method byte */

    int flags;  /* flags byte */

    uInt len;

    int c;

    /* Assure two bytes in the buffer so we can peek ahead -- handle case

       where first byte of header is at the end of the buffer after the last

       gzip segment */

    len = s->stream.avail_in;

    if (len < 2) {

        if (len) s->inbuf[0] = s->stream.next_in[0];

        errno = 0;

        len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);

        if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;

        s->stream.avail_in += len;

        s->stream.next_in = s->inbuf;

        if (s->stream.avail_in < 2) {

            s->transparent = s->stream.avail_in;

            return;

        }

    }

    /* Peek ahead to check the gzip magic header */

    if (s->stream.next_in[0] != gz_magic[0] ||

        s->stream.next_in[1] != gz_magic[1]) {

        s->transparent = 1;

        return;

    }

    s->stream.avail_in -= 2;

    s->stream.next_in += 2;

    /* Check the rest of the gzip header */

    method = get_byte(s);

    flags = get_byte(s);

    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {

        s->z_err = Z_DATA_ERROR;

        return;

    }

    /* Discard time, xflags and OS code: */

    for (len = 0; len < 6; len++) (void)get_byte(s);

    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */

        len  =  (uInt)get_byte(s);

        len += ((uInt)get_byte(s))<<8;

        /* len is garbage if EOF but the loop below will quit anyway */

        while (len-- != 0 && get_byte(s) != EOF) ;

    }

    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */

        while ((c = get_byte(s)) != 0 && c != EOF) ;

    }

    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */

        while ((c = get_byte(s)) != 0 && c != EOF) ;

    }

    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */

        for (len = 0; len < 2; len++) (void)get_byte(s);

    }

    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;

}

 /* ===========================================================================

 * Cleanup then free the given gz_stream. Return a zlib error code.

   Try freeing in the reverse order of allocations.

 */

local int destroy (s)

    gz_stream *s;

{

    int err = Z_OK;

    if (!s) return Z_STREAM_ERROR;

    TRYFREE(s->msg);

    if (s->stream.state != NULL) {

        if (s->mode == 'w') {

#ifdef NO_GZCOMPRESS

            err = Z_STREAM_ERROR;

#else

            err = deflateEnd(&(s->stream));

#endif

        } else if (s->mode == 'r') {

            err = inflateEnd(&(s->stream));

        }

    }

    if (s->file != NULL && fclose(s->file)) {

#ifdef ESPIPE

        if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */

#endif

            err = Z_ERRNO;

    }

    if (s->z_err < 0) err = s->z_err;

    TRYFREE(s->inbuf);

    TRYFREE(s->outbuf);

    TRYFREE(s->path);

    TRYFREE(s);

    return err;

}

/* ===========================================================================

     Reads the given number of uncompressed bytes from the compressed file.

   gzread returns the number of bytes actually read (0 for end of file).

*/

int ZEXPORT gzread (file, buf, len)

    gzFile file;

    voidp buf;

    unsigned len;

{

    gz_stream *s = (gz_stream*)file;

    Bytef *start = (Bytef*)buf; /* starting point for crc computation */

    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */

    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;

    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;

    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */

    next_out = (Byte*)buf;

    s->stream.next_out = (Bytef*)buf;

    s->stream.avail_out = len;

    if (s->stream.avail_out && s->back != EOF) {

        *next_out++ = s->back;

        s->stream.next_out++;

        s->stream.avail_out--;

        s->back = EOF;

        s->out++;

        start++;

        if (s->last) {

            s->z_err = Z_STREAM_END;

            return 1;

        }

    }

    while (s->stream.avail_out != 0) {

        if (s->transparent) {

            /* Copy first the lookahead bytes: */

            uInt n = s->stream.avail_in;

            if (n > s->stream.avail_out) n = s->stream.avail_out;

            if (n > 0) {

                zmemcpy(s->stream.next_out, s->stream.next_in, n);

                next_out += n;

                s->stream.next_out = next_out;

                s->stream.next_in   += n;

                s->stream.avail_out -= n;

                s->stream.avail_in  -= n;

            }

            if (s->stream.avail_out > 0) {

                s->stream.avail_out -=

                    (uInt)fread(next_out, 1, s->stream.avail_out, s->file);

            }

            len -= s->stream.avail_out;

            s->in  += len;

            s->out += len;

            if (len == 0) s->z_eof = 1;

            return (int)len;

        }

        if (s->stream.avail_in == 0 && !s->z_eof) {

            errno = 0;

            s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);

            if (s->stream.avail_in == 0) {

                s->z_eof = 1;

                if (ferror(s->file)) {

                    s->z_err = Z_ERRNO;

                    break;

                }

            }

            s->stream.next_in = s->inbuf;

        }

        s->in += s->stream.avail_in;

        s->out += s->stream.avail_out;

        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);

        s->in -= s->stream.avail_in;

        s->out -= s->stream.avail_out;

        if (s->z_err == Z_STREAM_END) {

            /* Check CRC and original size */

            s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));

            start = s->stream.next_out;

            if (getLong(s) != s->crc) {

                s->z_err = Z_DATA_ERROR;

            } else {

                (void)getLong(s);

                /* The uncompressed length returned by above getlong() may be

                 * different from s->out in case of concatenated .gz files.

                 * Check for such files:

                 */

                check_header(s);

                if (s->z_err == Z_OK) {

                    inflateReset(&(s->stream));

                    s->crc = crc32(0L, Z_NULL, 0);

                }

            }

        }

        if (s->z_err != Z_OK || s->z_eof) break;

    }

    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));

    if (len == s->stream.avail_out &&

        (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))

        return -1;

    return (int)(len - s->stream.avail_out);

}

/* ===========================================================================

      Reads one byte from the compressed file. gzgetc returns this byte

   or -1 in case of end of file or error.

*/

int ZEXPORT gzgetc(file)

    gzFile file;

{

    unsigned char c;

    return gzread(file, &c, 1) == 1 ? c : -1;

}

/* ===========================================================================

      Push one byte back onto the stream.

*/

int ZEXPORT gzungetc(c, file)

    int c;