1.1 --- a/tools/pcre/RunTest Sun Mar 17 11:29:55 2013 -0400
1.2 +++ b/tools/pcre/RunTest Sun Mar 17 11:32:03 2013 -0400
1.3 @@ -1,35 +1,164 @@
1.4 #! /bin/sh
1.5
1.6 -# Run PCRE tests.
1.7 +# Run the PCRE tests using the pcretest program. The appropriate tests are
1.8 +# selected, depending on which build-time options were used.
1.9 +#
1.10 +# All tests are now run both with and without -s, to ensure that everything is
1.11 +# tested with and without studying. However, there are some tests that produce
1.12 +# different output after studying, typically when we are tracing the actual
1.13 +# matching process (for example, using auto-callouts). In these few cases, the
1.14 +# tests are duplicated in the files, one with /S to force studying always, and
1.15 +# one with /SS to force *not* studying always. The use of -s doesn't then make
1.16 +# any difference to their output. There is also one test which compiles invalid
1.17 +# UTF-8 with the UTF-8 check turned off; for this, studying must also be
1.18 +# disabled with /SS.
1.19 +#
1.20 +# When JIT support is available, all the tests are also run with -s+ to test
1.21 +# (again, almost) everything with studying and the JIT option. There are also
1.22 +# two tests for JIT-specific features, one to be run when JIT support is
1.23 +# available, and one when it is not.
1.24 +#
1.25 +# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
1.26 +# possible to select which to test by the arguments -8, -16 or -32.
1.27 +#
1.28 +# Other arguments for this script can be individual test numbers, or the word
1.29 +# "valgrind", "valgrind-log" or "sim" followed by an argument to run cross-
1.30 +# compiled executables under a simulator, for example:
1.31 +#
1.32 +# RunTest 3 sim "qemu-arm -s 8388608"
1.33 +#
1.34 +#
1.35 +# There are two special cases where only one argument is allowed:
1.36 +#
1.37 +# If the first and only argument is "ebcdic", the script runs the special
1.38 +# EBCDIC test that can be useful for checking certain EBCDIC features, even
1.39 +# when run in an ASCII environment.
1.40 +#
1.41 +# If the script is obeyed as "RunTest list", a list of available tests is
1.42 +# output, but none of them are run.
1.43 +
1.44 +
1.45 +# Define test titles in variables so that they can be output as a list. Some
1.46 +# of them are modified (e.g. with -8 or -16) when used in the actual tests.
1.47
1.48 -valgrind=
1.49 +title1="Test 1: Main functionality (Compatible with Perl >= 5.10)"
1.50 +title2="Test 2: API, errors, internals, and non-Perl stuff"
1.51 +title3="Test 3: Locale-specific features"
1.52 +title4A="Test 4: UTF"
1.53 +title4B=" support (Compatible with Perl >= 5.10)"
1.54 +title5="Test 5: API, internals, and non-Perl stuff for UTF"
1.55 +title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)"
1.56 +title7="Test 7: API, internals, and non-Perl stuff for Unicode property support"
1.57 +title8="Test 8: DFA matching main functionality"
1.58 +title9="Test 9: DFA matching with UTF"
1.59 +title10="Test 10: DFA matching with Unicode properties"
1.60 +title11="Test 11: Internal offsets and code size tests"
1.61 +title12="Test 12: JIT-specific features (JIT available)"
1.62 +title13="Test 13: JIT-specific features (JIT not available)"
1.63 +title14="Test 14: Specials for the basic 8-bit library"
1.64 +title15="Test 15: Specials for the 8-bit library with UTF-8 support"
1.65 +title16="Test 16: Specials for the 8-bit library with Unicode propery support"
1.66 +title17="Test 17: Specials for the basic 16/32-bit library"
1.67 +title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support"
1.68 +title19="Test 19: Specials for the 16/32-bit library with Unicode property support"
1.69 +title20="Test 20: DFA specials for the basic 16/32-bit library"
1.70 +title21="Test 21: Reloads for the basic 16/32-bit library"
1.71 +title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support"
1.72 +title23="Test 23: Specials for the 16-bit library"
1.73 +title24="Test 24: Specials for the 16-bit library with UTF-16 support"
1.74 +title25="Test 25: Specials for the 32-bit library"
1.75 +title26="Test 26: Specials for the 32-bit library with UTF-32 support"
1.76 +
1.77 +if [ $# -eq 1 -a "$1" = "list" ]; then
1.78 + echo $title1
1.79 + echo $title2 "(not UTF)"
1.80 + echo $title3
1.81 + echo $title4A $title4B
1.82 + echo $title5 support
1.83 + echo $title6
1.84 + echo $title7
1.85 + echo $title8
1.86 + echo $title9
1.87 + echo $title10
1.88 + echo $title11
1.89 + echo $title12
1.90 + echo $title13
1.91 + echo $title14
1.92 + echo $title15
1.93 + echo $title16
1.94 + echo $title17
1.95 + echo $title18
1.96 + echo $title19
1.97 + echo $title20
1.98 + echo $title21
1.99 + echo $title22
1.100 + echo $title23
1.101 + echo $title24
1.102 + echo $title25
1.103 + echo $title26
1.104 + exit 0
1.105 +fi
1.106
1.107 # Set up a suitable "diff" command for comparison. Some systems
1.108 # have a diff that lacks a -u option. Try to deal with this.
1.109
1.110 -if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi
1.111 +cf="diff"
1.112 +diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"
1.113
1.114 # Find the test data
1.115
1.116 -testdata=testdata
1.117 if [ -n "$srcdir" -a -d "$srcdir" ] ; then
1.118 testdata="$srcdir/testdata"
1.119 +elif [ -d "./testdata" ] ; then
1.120 + testdata=./testdata
1.121 +elif [ -d "../testdata" ] ; then
1.122 + testdata=../testdata
1.123 +else
1.124 + echo "Cannot find the testdata directory"
1.125 + exit 1
1.126 fi
1.127
1.128 -# Find which optional facilities are available
1.129 +
1.130 +# ------ Special EBCDIC Test -------
1.131 +
1.132 +if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
1.133 + ./pcretest -C ebcdic >/dev/null
1.134 + ebcdic=$?
1.135 + if [ $ebcdic -ne 1 ] ; then
1.136 + echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
1.137 + exit 1
1.138 + fi
1.139
1.140 -case `./pcretest -C | ./pcregrep 'Internal link size'` in
1.141 - *2) link_size=2;;
1.142 - *3) link_size=3;;
1.143 - *4) link_size=4;;
1.144 - *) echo "Failed to find internal link size"; exit 1;;
1.145 -esac
1.146 + for opt in "" "-s" "-dfa" "-s -dfa"; do
1.147 + ./pcretest -q $opt $testdata/testinputEBC >testtry
1.148 + if [ $? = 0 ] ; then
1.149 + $cf $testdata/testoutputEBC testtry
1.150 + if [ $? != 0 ] ; then exit 1; fi
1.151 + else exit 1
1.152 + fi
1.153 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.154 + elif [ "$opt" = "-dfa" ] ; then echo " OK using DFA"
1.155 + elif [ "$opt" = "-s -dfa" ] ; then echo " OK using DFA with study"
1.156 + else echo " OK"
1.157 + fi
1.158 + done
1.159
1.160 -./pcretest -C | ./pcregrep 'No UTF-8 support' >/dev/null
1.161 -utf8=$?
1.162 +exit 0
1.163 +fi
1.164 +
1.165 +
1.166 +# ------ Normal Tests ------
1.167 +
1.168 +# Default values
1.169
1.170 -./pcretest -C | ./pcregrep 'No Unicode properties support' >/dev/null
1.171 -ucp=$?
1.172 +valgrind=
1.173 +sim=
1.174 +arg8=
1.175 +arg16=
1.176 +arg32=
1.177 +
1.178 +# This is in case the caller has set aliases (as I do - PH)
1.179 +unset cp ls mv rm
1.180
1.181 # Select which tests to run; for those that are explicitly requested, check
1.182 # that the necessary optional facilities are available.
1.183 @@ -44,6 +173,22 @@
1.184 do8=no
1.185 do9=no
1.186 do10=no
1.187 +do11=no
1.188 +do12=no
1.189 +do13=no
1.190 +do14=no
1.191 +do15=no
1.192 +do16=no
1.193 +do17=no
1.194 +do18=no
1.195 +do19=no
1.196 +do20=no
1.197 +do21=no
1.198 +do22=no
1.199 +do23=no
1.200 +do24=no
1.201 +do25=no
1.202 +do26=no
1.203
1.204 while [ $# -gt 0 ] ; do
1.205 case $1 in
1.206 @@ -57,25 +202,140 @@
1.207 8) do8=yes;;
1.208 9) do9=yes;;
1.209 10) do10=yes;;
1.210 - valgrind) valgrind="valgrind -q";;
1.211 - *) echo "Unknown test number $1"; exit 1;;
1.212 + 11) do11=yes;;
1.213 + 12) do12=yes;;
1.214 + 13) do13=yes;;
1.215 + 14) do14=yes;;
1.216 + 15) do15=yes;;
1.217 + 16) do16=yes;;
1.218 + 17) do17=yes;;
1.219 + 18) do18=yes;;
1.220 + 19) do19=yes;;
1.221 + 20) do20=yes;;
1.222 + 21) do21=yes;;
1.223 + 22) do22=yes;;
1.224 + 23) do23=yes;;
1.225 + 24) do24=yes;;
1.226 + 25) do25=yes;;
1.227 + 26) do26=yes;;
1.228 + -8) arg8=yes;;
1.229 + -16) arg16=yes;;
1.230 + -32) arg32=yes;;
1.231 + valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";;
1.232 + valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";;
1.233 + sim) shift; sim=$1;;
1.234 + *) echo "Unknown test number '$1'"; exit 1;;
1.235 esac
1.236 shift
1.237 done
1.238
1.239 -if [ $utf8 -eq 0 ] ; then
1.240 +# Find which optional facilities are available.
1.241 +
1.242 +$sim ./pcretest -C linksize >/dev/null
1.243 +link_size=$?
1.244 +if [ $link_size -lt 2 ] ; then
1.245 + echo "Failed to find internal link size"
1.246 + exit 1
1.247 +fi
1.248 +if [ $link_size -gt 4 ] ; then
1.249 + echo "Failed to find internal link size"
1.250 + exit 1
1.251 +fi
1.252 +
1.253 +# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
1.254 +# one need be.
1.255 +
1.256 +$sim ./pcretest -C pcre8 >/dev/null
1.257 +support8=$?
1.258 +$sim ./pcretest -C pcre16 >/dev/null
1.259 +support16=$?
1.260 +$sim ./pcretest -C pcre32 >/dev/null
1.261 +support32=$?
1.262 +
1.263 +# Initialize all bitsizes skipped
1.264 +
1.265 +test8=skip
1.266 +test16=skip
1.267 +test32=skip
1.268 +
1.269 +# If no bitsize arguments, select all that are available
1.270 +
1.271 +if [ "$arg8$arg16$arg32" = "" ] ; then
1.272 + if [ $support8 -ne 0 ] ; then
1.273 + test8=
1.274 + fi
1.275 + if [ $support16 -ne 0 ] ; then
1.276 + test16=-16
1.277 + fi
1.278 + if [ $support32 -ne 0 ] ; then
1.279 + test32=-32
1.280 + fi
1.281 +
1.282 +# Select requested bit sizes
1.283 +
1.284 +else
1.285 + if [ "$arg8" = yes ] ; then
1.286 + if [ $support8 -eq 0 ] ; then
1.287 + echo "Cannot run 8-bit library tests: 8-bit library not compiled"
1.288 + exit 1
1.289 + fi
1.290 + test8=
1.291 + fi
1.292 + if [ "$arg16" = yes ] ; then
1.293 + if [ $support16 -eq 0 ] ; then
1.294 + echo "Cannot run 16-bit library tests: 16-bit library not compiled"
1.295 + exit 1
1.296 + fi
1.297 + test16=-16
1.298 + fi
1.299 + if [ "$arg32" = yes ] ; then
1.300 + if [ $support32 -eq 0 ] ; then
1.301 + echo "Cannot run 32-bit library tests: 32-bit library not compiled"
1.302 + exit 1
1.303 + fi
1.304 + test32=-32
1.305 + fi
1.306 +fi
1.307 +
1.308 +# UTF support always applies to all bit sizes if both are supported; we can't
1.309 +# have UTF-8 support without UTF-16 support (for example).
1.310 +
1.311 +$sim ./pcretest -C utf >/dev/null
1.312 +utf=$?
1.313 +
1.314 +$sim ./pcretest -C ucp >/dev/null
1.315 +ucp=$?
1.316 +
1.317 +jitopt=
1.318 +$sim ./pcretest -C jit >/dev/null
1.319 +jit=$?
1.320 +if [ $jit -ne 0 ] ; then
1.321 + jitopt=-s+
1.322 +fi
1.323 +
1.324 +if [ $utf -eq 0 ] ; then
1.325 if [ $do4 = yes ] ; then
1.326 - echo "Can't run test 4 because UTF-8 support is not configured"
1.327 + echo "Can't run test 4 because UTF support is not configured"
1.328 exit 1
1.329 fi
1.330 if [ $do5 = yes ] ; then
1.331 - echo "Can't run test 5 because UTF-8 support is not configured"
1.332 + echo "Can't run test 5 because UTF support is not configured"
1.333 + exit 1
1.334 + fi
1.335 + if [ $do9 = yes ] ; then
1.336 + echo "Can't run test 8 because UTF support is not configured"
1.337 exit 1
1.338 fi
1.339 - if [ $do8 = yes ] ; then
1.340 - echo "Can't run test 8 because UTF-8 support is not configured"
1.341 + if [ $do15 = yes ] ; then
1.342 + echo "Can't run test 15 because UTF support is not configured"
1.343 exit 1
1.344 fi
1.345 + if [ $do18 = yes ] ; then
1.346 + echo "Can't run test 18 because UTF support is not configured"
1.347 + fi
1.348 + if [ $do22 = yes ] ; then
1.349 + echo "Can't run test 22 because UTF support is not configured"
1.350 + fi
1.351 fi
1.352
1.353 if [ $ucp -eq 0 ] ; then
1.354 @@ -83,82 +343,144 @@
1.355 echo "Can't run test 6 because Unicode property support is not configured"
1.356 exit 1
1.357 fi
1.358 - if [ $do9 = yes ] ; then
1.359 - echo "Can't run test 9 because Unicode property support is not configured"
1.360 + if [ $do7 = yes ] ; then
1.361 + echo "Can't run test 7 because Unicode property support is not configured"
1.362 exit 1
1.363 fi
1.364 if [ $do10 = yes ] ; then
1.365 echo "Can't run test 10 because Unicode property support is not configured"
1.366 exit 1
1.367 fi
1.368 + if [ $do16 = yes ] ; then
1.369 + echo "Can't run test 16 because Unicode property support is not configured"
1.370 + exit 1
1.371 + fi
1.372 + if [ $do19 = yes ] ; then
1.373 + echo "Can't run test 19 because Unicode property support is not configured"
1.374 + exit 1
1.375 + fi
1.376 fi
1.377
1.378 if [ $link_size -ne 2 ] ; then
1.379 - if [ $do10 = yes ] ; then
1.380 - echo "Can't run test 10 because the link size ($link_size) is not 2"
1.381 + if [ $do11 = yes ] ; then
1.382 + echo "Can't run test 11 because the link size ($link_size) is not 2"
1.383 + exit 1
1.384 + fi
1.385 +fi
1.386 +
1.387 +if [ $jit -eq 0 ] ; then
1.388 + if [ $do12 = "yes" ] ; then
1.389 + echo "Can't run test 12 because JIT support is not configured"
1.390 + exit 1
1.391 + fi
1.392 +else
1.393 + if [ $do13 = "yes" ] ; then
1.394 + echo "Can't run test 13 because JIT support is configured"
1.395 exit 1
1.396 fi
1.397 fi
1.398
1.399 -# If no specific tests were requested, select all that are relevant.
1.400 +# If no specific tests were requested, select all. Those that are not
1.401 +# relevant will be skipped.
1.402
1.403 -if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \
1.404 - $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \
1.405 - $do9 = no -a $do10 = no ] ; then
1.406 +if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \
1.407 + $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \
1.408 + $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no -a \
1.409 + $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \
1.410 + $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \
1.411 + $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \
1.412 + $do25 = no -a $do26 = no ] ; then
1.413 do1=yes
1.414 do2=yes
1.415 do3=yes
1.416 - if [ $utf8 -ne 0 ] ; then do4=yes; fi
1.417 - if [ $utf8 -ne 0 ] ; then do5=yes; fi
1.418 - if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do6=yes; fi
1.419 + do4=yes
1.420 + do5=yes
1.421 + do6=yes
1.422 do7=yes
1.423 - if [ $utf8 -ne 0 ] ; then do8=yes; fi
1.424 - if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do9=yes; fi
1.425 - if [ $link_size -eq 2 -a $ucp -ne 0 ] ; then do10=yes; fi
1.426 + do8=yes
1.427 + do9=yes
1.428 + do10=yes
1.429 + do11=yes
1.430 + do12=yes
1.431 + do13=yes
1.432 + do14=yes
1.433 + do15=yes
1.434 + do16=yes
1.435 + do17=yes
1.436 + do18=yes
1.437 + do19=yes
1.438 + do20=yes
1.439 + do21=yes
1.440 + do22=yes
1.441 + do23=yes
1.442 + do24=yes
1.443 + do25=yes
1.444 + do26=yes
1.445 fi
1.446
1.447 -# Show which release
1.448 +# Show which release and which test data
1.449
1.450 echo ""
1.451 -echo PCRE C library tests
1.452 -./pcretest /dev/null
1.453 +echo PCRE C library tests using test data from $testdata
1.454 +$sim ./pcretest /dev/null
1.455
1.456 -# Primary test, Perl-compatible
1.457 +for bmode in "$test8" "$test16" "$test32"; do
1.458 + case "$bmode" in
1.459 + skip) continue;;
1.460 + -16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
1.461 + bits=16; echo "---- Testing 16-bit library ----"; echo "";;
1.462 + -32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
1.463 + bits=32; echo "---- Testing 32-bit library ----"; echo "";;
1.464 + *) bits=8; echo "---- Testing 8-bit library ----"; echo "";;
1.465 + esac
1.466 +
1.467 +# Primary test, compatible with JIT and all versions of Perl >= 5.8
1.468
1.469 if [ $do1 = yes ] ; then
1.470 - echo "Test 1: main functionality (Perl compatible)"
1.471 - $valgrind ./pcretest -q $testdata/testinput1 testtry
1.472 - if [ $? = 0 ] ; then
1.473 - $cf $testdata/testoutput1 testtry
1.474 - if [ $? != 0 ] ; then exit 1; fi
1.475 - else exit 1
1.476 - fi
1.477 - echo "OK"
1.478 + echo $title1
1.479 + for opt in "" "-s" $jitopt; do
1.480 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry
1.481 + if [ $? = 0 ] ; then
1.482 + $cf $testdata/testoutput1 testtry
1.483 + if [ $? != 0 ] ; then exit 1; fi
1.484 + else exit 1
1.485 + fi
1.486 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.487 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.488 + else echo " OK"
1.489 + fi
1.490 + done
1.491 fi
1.492
1.493 -# PCRE tests that are not Perl-compatible - API & error tests, mostly
1.494 +# PCRE tests that are not JIT or Perl-compatible: API, errors, internals
1.495
1.496 if [ $do2 = yes ] ; then
1.497 - echo "Test 2: API and error handling (not Perl compatible)"
1.498 - $valgrind ./pcretest -q $testdata/testinput2 testtry
1.499 - if [ $? = 0 ] ; then
1.500 - $cf $testdata/testoutput2 testtry
1.501 - if [ $? != 0 ] ; then exit 1; fi
1.502 - else
1.503 - echo " "
1.504 - echo "** Test 2 requires a lot of stack. If it has crashed with a"
1.505 - echo "** segmentation fault, it may be that you do not have enough"
1.506 - echo "** stack available by default. Please see the 'pcrestack' man"
1.507 - echo "** page for a discussion of PCRE's stack usage."
1.508 - echo " "
1.509 - exit 1
1.510 - fi
1.511 - echo "OK"
1.512 + echo $title2 "(not UTF-$bits)"
1.513 + for opt in "" "-s" $jitopt; do
1.514 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry
1.515 + if [ $? = 0 ] ; then
1.516 + $cf $testdata/testoutput2 testtry
1.517 + if [ $? != 0 ] ; then exit 1; fi
1.518 + else
1.519 + echo " "
1.520 + echo "** Test 2 requires a lot of stack. If it has crashed with a"
1.521 + echo "** segmentation fault, it may be that you do not have enough"
1.522 + echo "** stack available by default. Please see the 'pcrestack' man"
1.523 + echo "** page for a discussion of PCRE's stack usage."
1.524 + echo " "
1.525 + exit 1
1.526 + fi
1.527 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.528 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.529 + else echo " OK"
1.530 + fi
1.531 + done
1.532 fi
1.533
1.534 # Locale-specific tests, provided that either the "fr_FR" or the "french"
1.535 # locale is available. The former is the Unix-like standard; the latter is
1.536 -# for Windows.
1.537 +# for Windows. Another possibility is "fr", which needs to be run against
1.538 +# the Windows-specific input and output files.
1.539
1.540 if [ $do3 = yes ] ; then
1.541 locale -a | grep '^fr_FR$' >/dev/null
1.542 @@ -167,126 +489,527 @@
1.543 infile=$testdata/testinput3
1.544 outfile=$testdata/testoutput3
1.545 else
1.546 + infile=test3input
1.547 + outfile=test3output
1.548 locale -a | grep '^french$' >/dev/null
1.549 if [ $? -eq 0 ] ; then
1.550 locale=french
1.551 sed 's/fr_FR/french/' $testdata/testinput3 >test3input
1.552 sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
1.553 - infile=test3input
1.554 - outfile=test3output
1.555 else
1.556 - locale=
1.557 + locale -a | grep '^fr$' >/dev/null
1.558 + if [ $? -eq 0 ] ; then
1.559 + locale=fr
1.560 + sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input
1.561 + sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output
1.562 + else
1.563 + locale=
1.564 + fi
1.565 fi
1.566 fi
1.567
1.568 if [ "$locale" != "" ] ; then
1.569 - echo "Test 3: locale-specific features (using '$locale' locale)"
1.570 - $valgrind ./pcretest -q $infile testtry
1.571 - if [ $? = 0 ] ; then
1.572 - $cf $outfile testtry
1.573 - if [ $? != 0 ] ; then
1.574 - echo " "
1.575 - echo "Locale test did not run entirely successfully."
1.576 - echo "This usually means that there is a problem with the locale"
1.577 - echo "settings rather than a bug in PCRE."
1.578 - else
1.579 - echo "OK"
1.580 + echo $title3 "(using '$locale' locale)"
1.581 + for opt in "" "-s" $jitopt; do
1.582 + $sim $valgrind ./pcretest -q $bmode $opt $infile testtry
1.583 + if [ $? = 0 ] ; then
1.584 + $cf $outfile testtry
1.585 + if [ $? != 0 ] ; then
1.586 + echo " "
1.587 + echo "Locale test did not run entirely successfully."
1.588 + echo "This usually means that there is a problem with the locale"
1.589 + echo "settings rather than a bug in PCRE."
1.590 + break;
1.591 + else
1.592 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.593 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.594 + else echo " OK"
1.595 + fi
1.596 + fi
1.597 + else exit 1
1.598 fi
1.599 - else exit 1
1.600 - fi
1.601 + done
1.602 else
1.603 - echo "Cannot test locale-specific features - neither the 'fr_FR' nor the"
1.604 - echo "'french' locale exists, or the \"locale\" command is not available"
1.605 + echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or"
1.606 + echo "'french' locales exist, or the \"locale\" command is not available"
1.607 echo "to check for them."
1.608 echo " "
1.609 fi
1.610 fi
1.611
1.612 -# Additional tests for UTF8 support
1.613 +# Additional tests for UTF support
1.614
1.615 if [ $do4 = yes ] ; then
1.616 - echo "Test 4: UTF-8 support (Perl compatible)"
1.617 - $valgrind ./pcretest -q $testdata/testinput4 testtry
1.618 - if [ $? = 0 ] ; then
1.619 - $cf $testdata/testoutput4 testtry
1.620 - if [ $? != 0 ] ; then exit 1; fi
1.621 - else exit 1
1.622 + echo ${title4A}-${bits}${title4B}
1.623 + if [ $utf -eq 0 ] ; then
1.624 + echo " Skipped because UTF-$bits support is not available"
1.625 + else
1.626 + for opt in "" "-s" $jitopt; do
1.627 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry
1.628 + if [ $? = 0 ] ; then
1.629 + $cf $testdata/testoutput4 testtry
1.630 + if [ $? != 0 ] ; then exit 1; fi
1.631 + else exit 1
1.632 + fi
1.633 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.634 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.635 + else echo " OK"
1.636 + fi
1.637 + done
1.638 fi
1.639 - echo "OK"
1.640 fi
1.641
1.642 if [ $do5 = yes ] ; then
1.643 - echo "Test 5: API and internals for UTF-8 support (not Perl compatible)"
1.644 - $valgrind ./pcretest -q $testdata/testinput5 testtry
1.645 - if [ $? = 0 ] ; then
1.646 - $cf $testdata/testoutput5 testtry
1.647 - if [ $? != 0 ] ; then exit 1; fi
1.648 - else exit 1
1.649 + echo ${title5}-${bits} support
1.650 + if [ $utf -eq 0 ] ; then
1.651 + echo " Skipped because UTF-$bits support is not available"
1.652 + else
1.653 + for opt in "" "-s" $jitopt; do
1.654 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry
1.655 + if [ $? = 0 ] ; then
1.656 + $cf $testdata/testoutput5 testtry
1.657 + if [ $? != 0 ] ; then exit 1; fi
1.658 + else exit 1
1.659 + fi
1.660 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.661 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.662 + else echo " OK"
1.663 + fi
1.664 + done
1.665 fi
1.666 - echo "OK"
1.667 fi
1.668
1.669 if [ $do6 = yes ] ; then
1.670 - echo "Test 6: Unicode property support"
1.671 - $valgrind ./pcretest -q $testdata/testinput6 testtry
1.672 - if [ $? = 0 ] ; then
1.673 - $cf $testdata/testoutput6 testtry
1.674 - if [ $? != 0 ] ; then exit 1; fi
1.675 - else exit 1
1.676 + echo $title6
1.677 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
1.678 + echo " Skipped because Unicode property support is not available"
1.679 + else
1.680 + for opt in "" "-s" $jitopt; do
1.681 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry
1.682 + if [ $? = 0 ] ; then
1.683 + $cf $testdata/testoutput6 testtry
1.684 + if [ $? != 0 ] ; then exit 1; fi
1.685 + else exit 1
1.686 + fi
1.687 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.688 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.689 + else echo " OK"
1.690 + fi
1.691 + done
1.692 fi
1.693 - echo "OK"
1.694 +fi
1.695 +
1.696 +# Test non-Perl-compatible Unicode property support
1.697 +
1.698 +if [ $do7 = yes ] ; then
1.699 + echo $title7
1.700 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
1.701 + echo " Skipped because Unicode property support is not available"
1.702 + else
1.703 + for opt in "" "-s" $jitopt; do
1.704 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry
1.705 + if [ $? = 0 ] ; then
1.706 + $cf $testdata/testoutput7 testtry
1.707 + if [ $? != 0 ] ; then exit 1; fi
1.708 + else exit 1
1.709 + fi
1.710 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.711 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.712 + else echo " OK"
1.713 + fi
1.714 + done
1.715 + fi
1.716 fi
1.717
1.718 # Tests for DFA matching support
1.719
1.720 -if [ $do7 = yes ] ; then
1.721 - echo "Test 7: DFA matching"
1.722 - $valgrind ./pcretest -q -dfa $testdata/testinput7 testtry
1.723 - if [ $? = 0 ] ; then
1.724 - $cf $testdata/testoutput7 testtry
1.725 - if [ $? != 0 ] ; then exit 1; fi
1.726 - else exit 1
1.727 - fi
1.728 - echo "OK"
1.729 -fi
1.730 -
1.731 if [ $do8 = yes ] ; then
1.732 - echo "Test 8: DFA matching with UTF-8"
1.733 - $valgrind ./pcretest -q -dfa $testdata/testinput8 testtry
1.734 - if [ $? = 0 ] ; then
1.735 - $cf $testdata/testoutput8 testtry
1.736 - if [ $? != 0 ] ; then exit 1; fi
1.737 - else exit 1
1.738 - fi
1.739 - echo "OK"
1.740 + echo $title8
1.741 + for opt in "" "-s"; do
1.742 + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry
1.743 + if [ $? = 0 ] ; then
1.744 + $cf $testdata/testoutput8 testtry
1.745 + if [ $? != 0 ] ; then exit 1; fi
1.746 + else exit 1
1.747 + fi
1.748 + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi
1.749 + done
1.750 fi
1.751
1.752 if [ $do9 = yes ] ; then
1.753 - echo "Test 9: DFA matching with Unicode properties"
1.754 - $valgrind ./pcretest -q -dfa $testdata/testinput9 testtry
1.755 - if [ $? = 0 ] ; then
1.756 - $cf $testdata/testoutput9 testtry
1.757 - if [ $? != 0 ] ; then exit 1; fi
1.758 - else exit 1
1.759 + echo ${title9}-${bits}
1.760 + if [ $utf -eq 0 ] ; then
1.761 + echo " Skipped because UTF-$bits support is not available"
1.762 + else
1.763 + for opt in "" "-s"; do
1.764 + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry
1.765 + if [ $? = 0 ] ; then
1.766 + $cf $testdata/testoutput9 testtry
1.767 + if [ $? != 0 ] ; then exit 1; fi
1.768 + else exit 1
1.769 + fi
1.770 + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi
1.771 + done
1.772 fi
1.773 - echo "OK"
1.774 +fi
1.775 +
1.776 +if [ $do10 = yes ] ; then
1.777 + echo $title10
1.778 + if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
1.779 + echo " Skipped because Unicode property support is not available"
1.780 + else
1.781 + for opt in "" "-s"; do
1.782 + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry
1.783 + if [ $? = 0 ] ; then
1.784 + $cf $testdata/testoutput10 testtry
1.785 + if [ $? != 0 ] ; then exit 1; fi
1.786 + else exit 1
1.787 + fi
1.788 + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi
1.789 + done
1.790 + fi
1.791 fi
1.792
1.793 # Test of internal offsets and code sizes. This test is run only when there
1.794 # is Unicode property support and the link size is 2. The actual tests are
1.795 # mostly the same as in some of the above, but in this test we inspect some
1.796 # offsets and sizes that require a known link size. This is a doublecheck for
1.797 -# the maintainer, just in case something changes unexpectely.
1.798 +# the maintainer, just in case something changes unexpectely. The output from
1.799 +# this test is not the same in 8-bit and 16-bit modes.
1.800 +
1.801 +if [ $do11 = yes ] ; then
1.802 + echo $title11
1.803 + if [ $link_size -ne 2 ] ; then
1.804 + echo " Skipped because link size is not 2"
1.805 + elif [ $ucp -eq 0 ] ; then
1.806 + echo " Skipped because Unicode property support is not available"
1.807 + else
1.808 + for opt in "" "-s"; do
1.809 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry
1.810 + if [ $? = 0 ] ; then
1.811 + $cf $testdata/testoutput11-$bits testtry
1.812 + if [ $? != 0 ] ; then exit 1; fi
1.813 + else exit 1
1.814 + fi
1.815 + if [ "$opt" = "-s" ] ; then echo " OK with study" ; else echo " OK"; fi
1.816 + done
1.817 + fi
1.818 +fi
1.819 +
1.820 +# Test JIT-specific features when JIT is available
1.821 +
1.822 +if [ $do12 = yes ] ; then
1.823 + echo $title12
1.824 + if [ $jit -eq 0 ] ; then
1.825 + echo " Skipped because JIT is not available or not usable"
1.826 + else
1.827 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry
1.828 + if [ $? = 0 ] ; then
1.829 + $cf $testdata/testoutput12 testtry
1.830 + if [ $? != 0 ] ; then exit 1; fi
1.831 + else exit 1
1.832 + fi
1.833 + echo " OK"
1.834 + fi
1.835 +fi
1.836 +
1.837 +# Test JIT-specific features when JIT is not available
1.838 +
1.839 +if [ $do13 = yes ] ; then
1.840 + echo $title13
1.841 + if [ $jit -ne 0 ] ; then
1.842 + echo " Skipped because JIT is available"
1.843 + else
1.844 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry
1.845 + if [ $? = 0 ] ; then
1.846 + $cf $testdata/testoutput13 testtry
1.847 + if [ $? != 0 ] ; then exit 1; fi
1.848 + else exit 1
1.849 + fi
1.850 + echo " OK"
1.851 + fi
1.852 +fi
1.853 +
1.854 +# Tests for 8-bit-specific features
1.855
1.856 -if [ $do10 = yes ] ; then
1.857 - echo "Test 10: Internal offsets and code size tests"
1.858 - $valgrind ./pcretest -q $testdata/testinput10 testtry
1.859 - if [ $? = 0 ] ; then
1.860 - $cf $testdata/testoutput10 testtry
1.861 - if [ $? != 0 ] ; then exit 1; fi
1.862 - else exit 1
1.863 +if [ "$do14" = yes ] ; then
1.864 + echo $title14
1.865 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then
1.866 + echo " Skipped when running 16/32-bit tests"
1.867 + else
1.868 + cp -f $testdata/saved16 testsaved16
1.869 + cp -f $testdata/saved32 testsaved32
1.870 + for opt in "" "-s" $jitopt; do
1.871 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry
1.872 + if [ $? = 0 ] ; then
1.873 + $cf $testdata/testoutput14 testtry
1.874 + if [ $? != 0 ] ; then exit 1; fi
1.875 + else exit 1
1.876 + fi
1.877 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.878 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.879 + else echo " OK"
1.880 + fi
1.881 + done
1.882 + fi
1.883 +fi
1.884 +
1.885 +# Tests for 8-bit-specific features (needs UTF-8 support)
1.886 +
1.887 +if [ "$do15" = yes ] ; then
1.888 + echo $title15
1.889 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then
1.890 + echo " Skipped when running 16/32-bit tests"
1.891 + elif [ $utf -eq 0 ] ; then
1.892 + echo " Skipped because UTF-$bits support is not available"
1.893 + else
1.894 + for opt in "" "-s" $jitopt; do
1.895 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry
1.896 + if [ $? = 0 ] ; then
1.897 + $cf $testdata/testoutput15 testtry
1.898 + if [ $? != 0 ] ; then exit 1; fi
1.899 + else exit 1
1.900 + fi
1.901 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.902 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.903 + else echo " OK"
1.904 + fi
1.905 + done
1.906 fi
1.907 - echo "OK"
1.908 +fi
1.909 +
1.910 +# Tests for 8-bit-specific features (Unicode property support)
1.911 +
1.912 +if [ $do16 = yes ] ; then
1.913 + echo $title16
1.914 + if [ "$bits" = "16" -o "$bits" = "32" ] ; then
1.915 + echo " Skipped when running 16/32-bit tests"
1.916 + elif [ $ucp -eq 0 ] ; then
1.917 + echo " Skipped because Unicode property support is not available"
1.918 + else
1.919 + for opt in "" "-s" $jitopt; do
1.920 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry
1.921 + if [ $? = 0 ] ; then
1.922 + $cf $testdata/testoutput16 testtry
1.923 + if [ $? != 0 ] ; then exit 1; fi
1.924 + else exit 1
1.925 + fi
1.926 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.927 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.928 + else echo " OK"
1.929 + fi
1.930 + done
1.931 + fi
1.932 +fi
1.933 +
1.934 +# Tests for 16/32-bit-specific features
1.935 +
1.936 +if [ $do17 = yes ] ; then
1.937 + echo $title17
1.938 + if [ "$bits" = "8" ] ; then
1.939 + echo " Skipped when running 8-bit tests"
1.940 + else
1.941 + for opt in "" "-s" $jitopt; do
1.942 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry
1.943 + if [ $? = 0 ] ; then
1.944 + $cf $testdata/testoutput17 testtry
1.945 + if [ $? != 0 ] ; then exit 1; fi
1.946 + else exit 1
1.947 + fi
1.948 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.949 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.950 + else echo " OK"
1.951 + fi
1.952 + done
1.953 + fi
1.954 fi
1.955
1.956 +# Tests for 16/32-bit-specific features (UTF-16/32 support)
1.957 +
1.958 +if [ $do18 = yes ] ; then
1.959 + echo $title18
1.960 + if [ "$bits" = "8" ] ; then
1.961 + echo " Skipped when running 8-bit tests"
1.962 + elif [ $utf -eq 0 ] ; then
1.963 + echo " Skipped because UTF-$bits support is not available"
1.964 + else
1.965 + for opt in "" "-s" $jitopt; do
1.966 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry
1.967 + if [ $? = 0 ] ; then
1.968 + $cf $testdata/testoutput18-$bits testtry
1.969 + if [ $? != 0 ] ; then exit 1; fi
1.970 + else exit 1
1.971 + fi
1.972 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.973 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.974 + else echo " OK"
1.975 + fi
1.976 + done
1.977 + fi
1.978 +fi
1.979 +
1.980 +# Tests for 16/32-bit-specific features (Unicode property support)
1.981 +
1.982 +if [ $do19 = yes ] ; then
1.983 + echo $title19
1.984 + if [ "$bits" = "8" ] ; then
1.985 + echo " Skipped when running 8-bit tests"
1.986 + elif [ $ucp -eq 0 ] ; then
1.987 + echo " Skipped because Unicode property support is not available"
1.988 + else
1.989 + for opt in "" "-s" $jitopt; do
1.990 + $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry
1.991 + if [ $? = 0 ] ; then
1.992 + $cf $testdata/testoutput19 testtry
1.993 + if [ $? != 0 ] ; then exit 1; fi
1.994 + else exit 1
1.995 + fi
1.996 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.997 + elif [ "$opt" = "-s+" ] ; then echo " OK with JIT study"
1.998 + else echo " OK"
1.999 + fi
1.1000 + done
1.1001 + fi
1.1002 +fi
1.1003 +
1.1004 +# Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode
1.1005 +
1.1006 +if [ $do20 = yes ] ; then
1.1007 + echo $title20
1.1008 + if [ "$bits" = "8" ] ; then
1.1009 + echo " Skipped when running 8-bit tests"
1.1010 + else
1.1011 + for opt in "" "-s"; do
1.1012 + $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry
1.1013 + if [ $? = 0 ] ; then
1.1014 + $cf $testdata/testoutput20 testtry
1.1015 + if [ $? != 0 ] ; then exit 1; fi
1.1016 + else exit 1
1.1017 + fi
1.1018 + if [ "$opt" = "-s" ] ; then echo " OK with study"
1.1019 + else echo " OK"
1.1020 + fi
1.1021 + done
1.1022 + fi
1.1023 +fi
1.1024 +
1.1025 +# Tests for reloads with 16/32-bit library
1.1026 +
1.1027 +if [ $do21 = yes ] ; then
1.1028 + echo $title21
1.1029 + if [ "$bits" = "8" ] ; then
1.1030 + echo " Skipped when running 8-bit tests"
1.1031 + elif [ $link_size -ne 2 ] ; then
1.1032 + echo " Skipped because link size is not 2"
1.1033 + else
1.1034 + cp -f $testdata/saved8 testsaved8
1.1035 + cp -f $testdata/saved16LE-1 testsaved16LE-1
1.1036 + cp -f $testdata/saved16BE-1 testsaved16BE-1
1.1037 + cp -f $testdata/saved32LE-1 testsaved32LE-1
1.1038 + cp -f $testdata/saved32BE-1 testsaved32BE-1
1.1039 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry
1.1040 + if [ $? = 0 ] ; then
1.1041 + $cf $testdata/testoutput21-$bits testtry
1.1042 + if [ $? != 0 ] ; then exit 1; fi
1.1043 + else exit 1
1.1044 + fi
1.1045 + echo " OK"
1.1046 + fi
1.1047 +fi
1.1048 +
1.1049 +# Tests for reloads with 16/32-bit library (UTF-16 support)
1.1050 +
1.1051 +if [ $do22 = yes ] ; then
1.1052 + echo $title22
1.1053 + if [ "$bits" = "8" ] ; then
1.1054 + echo " Skipped when running 8-bit tests"
1.1055 + elif [ $utf -eq 0 ] ; then
1.1056 + echo " Skipped because UTF-$bits support is not available"
1.1057 + elif [ $link_size -ne 2 ] ; then
1.1058 + echo " Skipped because link size is not 2"
1.1059 + else
1.1060 + cp -f $testdata/saved16LE-2 testsaved16LE-2
1.1061 + cp -f $testdata/saved16BE-2 testsaved16BE-2
1.1062 + cp -f $testdata/saved32LE-2 testsaved32LE-2
1.1063 + cp -f $testdata/saved32BE-2 testsaved32BE-2
1.1064 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry
1.1065 + if [ $? = 0 ] ; then
1.1066 + $cf $testdata/testoutput22-$bits testtry
1.1067 + if [ $? != 0 ] ; then exit 1; fi
1.1068 + else exit 1
1.1069 + fi
1.1070 + echo " OK"
1.1071 + fi
1.1072 +fi
1.1073 +
1.1074 +if [ $do23 = yes ] ; then
1.1075 + echo $title23
1.1076 + if [ "$bits" = "8" -o "$bits" = "32" ] ; then
1.1077 + echo " Skipped when running 8/32-bit tests"
1.1078 + else
1.1079 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry
1.1080 + if [ $? = 0 ] ; then
1.1081 + $cf $testdata/testoutput23 testtry
1.1082 + if [ $? != 0 ] ; then exit 1; fi
1.1083 + else exit 1
1.1084 + fi
1.1085 + echo " OK"
1.1086 + fi
1.1087 +fi
1.1088 +
1.1089 +if [ $do24 = yes ] ; then
1.1090 + echo $title24
1.1091 + if [ "$bits" = "8" -o "$bits" = "32" ] ; then
1.1092 + echo " Skipped when running 8/32-bit tests"
1.1093 + elif [ $utf -eq 0 ] ; then
1.1094 + echo " Skipped because UTF-$bits support is not available"
1.1095 + else
1.1096 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry
1.1097 + if [ $? = 0 ] ; then
1.1098 + $cf $testdata/testoutput24 testtry
1.1099 + if [ $? != 0 ] ; then exit 1; fi
1.1100 + else exit 1
1.1101 + fi
1.1102 + echo " OK"
1.1103 + fi
1.1104 +fi
1.1105 +
1.1106 +if [ $do25 = yes ] ; then
1.1107 + echo $title25
1.1108 + if [ "$bits" = "8" -o "$bits" = "16" ] ; then
1.1109 + echo " Skipped when running 8/16-bit tests"
1.1110 + else
1.1111 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry
1.1112 + if [ $? = 0 ] ; then
1.1113 + $cf $testdata/testoutput25 testtry
1.1114 + if [ $? != 0 ] ; then exit 1; fi
1.1115 + else exit 1
1.1116 + fi
1.1117 + echo " OK"
1.1118 + fi
1.1119 +fi
1.1120 +
1.1121 +if [ $do26 = yes ] ; then
1.1122 + echo $title26
1.1123 + if [ "$bits" = "8" -o "$bits" = "16" ] ; then
1.1124 + echo " Skipped when running 8/16-bit tests"
1.1125 + elif [ $utf -eq 0 ] ; then
1.1126 + echo " Skipped because UTF-$bits support is not available"
1.1127 + else
1.1128 + $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry
1.1129 + if [ $? = 0 ] ; then
1.1130 + $cf $testdata/testoutput26 testtry
1.1131 + if [ $? != 0 ] ; then exit 1; fi
1.1132 + else exit 1
1.1133 + fi
1.1134 + echo " OK"
1.1135 + fi
1.1136 +fi
1.1137 +
1.1138 +# End of loop for 8/16/32-bit tests
1.1139 +done
1.1140 +
1.1141 +# Clean up local working files
1.1142 +rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry
1.1143 +
1.1144 # End
