diff -r c7b4237fff50 -r 03a67e41afbc extensions/sqlite/sqlite-source/os_win.c --- a/extensions/sqlite/sqlite-source/os_win.c Fri Mar 28 06:21:34 2008 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1545 +0,0 @@ -/* -** 2004 May 22 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** This file contains code that is specific to windows. -*/ -#include "sqliteInt.h" -#if OS_WIN /* This file is used for windows only */ - - -/* -** A Note About Memory Allocation: -** -** This driver uses malloc()/free() directly rather than going through -** the SQLite-wrappers sqlite3_malloc()/sqlite3_free(). Those wrappers -** are designed for use on embedded systems where memory is scarce and -** malloc failures happen frequently. Win32 does not typically run on -** embedded systems, and when it does the developers normally have bigger -** problems to worry about than running out of memory. So there is not -** a compelling need to use the wrappers. -** -** But there is a good reason to not use the wrappers. If we use the -** wrappers then we will get simulated malloc() failures within this -** driver. And that causes all kinds of problems for our tests. We -** could enhance SQLite to deal with simulated malloc failures within -** the OS driver, but the code to deal with those failure would not -** be exercised on Linux (which does not need to malloc() in the driver) -** and so we would have difficulty writing coverage tests for that -** code. Better to leave the code out, we think. -** -** The point of this discussion is as follows: When creating a new -** OS layer for an embedded system, if you use this file as an example, -** avoid the use of malloc()/free(). Those routines work ok on windows -** desktops but not so well in embedded systems. -*/ - -#include - -#ifdef __CYGWIN__ -# include -#endif - -/* -** Macros used to determine whether or not to use threads. -*/ -#if defined(THREADSAFE) && THREADSAFE -# define SQLITE_W32_THREADS 1 -#endif - -/* -** Include code that is common to all os_*.c files -*/ -#include "os_common.h" - -/* -** Determine if we are dealing with WindowsCE - which has a much -** reduced API. -*/ -#if defined(_WIN32_WCE) -# define OS_WINCE 1 -# define AreFileApisANSI() 1 -#else -# define OS_WINCE 0 -#endif - -/* -** WinCE lacks native support for file locking so we have to fake it -** with some code of our own. -*/ -#if OS_WINCE -typedef struct winceLock { - int nReaders; /* Number of reader locks obtained */ - BOOL bPending; /* Indicates a pending lock has been obtained */ - BOOL bReserved; /* Indicates a reserved lock has been obtained */ - BOOL bExclusive; /* Indicates an exclusive lock has been obtained */ -} winceLock; -#endif - -/* -** The winFile structure is a subclass of sqlite3_file* specific to the win32 -** portability layer. -*/ -typedef struct winFile winFile; -struct winFile { - const sqlite3_io_methods *pMethod;/* Must be first */ - HANDLE h; /* Handle for accessing the file */ - unsigned char locktype; /* Type of lock currently held on this file */ - short sharedLockByte; /* Randomly chosen byte used as a shared lock */ -#if OS_WINCE - WCHAR *zDeleteOnClose; /* Name of file to delete when closing */ - HANDLE hMutex; /* Mutex used to control access to shared lock */ - HANDLE hShared; /* Shared memory segment used for locking */ - winceLock local; /* Locks obtained by this instance of winFile */ - winceLock *shared; /* Global shared lock memory for the file */ -#endif -}; - - -/* -** The following variable is (normally) set once and never changes -** thereafter. It records whether the operating system is Win95 -** or WinNT. -** -** 0: Operating system unknown. -** 1: Operating system is Win95. -** 2: Operating system is WinNT. -** -** In order to facilitate testing on a WinNT system, the test fixture -** can manually set this value to 1 to emulate Win98 behavior. -*/ -#ifdef SQLITE_TEST -int sqlite3_os_type = 0; -#else -static int sqlite3_os_type = 0; -#endif - -/* -** Return true (non-zero) if we are running under WinNT, Win2K, WinXP, -** or WinCE. Return false (zero) for Win95, Win98, or WinME. -** -** Here is an interesting observation: Win95, Win98, and WinME lack -** the LockFileEx() API. But we can still statically link against that -** API as long as we don't call it win running Win95/98/ME. A call to -** this routine is used to determine if the host is Win95/98/ME or -** WinNT/2K/XP so that we will know whether or not we can safely call -** the LockFileEx() API. -*/ -#if OS_WINCE -# define isNT() (1) -#else - static int isNT(void){ - if( sqlite3_os_type==0 ){ - OSVERSIONINFO sInfo; - sInfo.dwOSVersionInfoSize = sizeof(sInfo); - GetVersionEx(&sInfo); - sqlite3_os_type = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1; - } - return sqlite3_os_type==2; - } -#endif /* OS_WINCE */ - -/* -** Convert a UTF-8 string to microsoft unicode (UTF-16?). -** -** Space to hold the returned string is obtained from malloc. -*/ -static WCHAR *utf8ToUnicode(const char *zFilename){ - int nChar; - WCHAR *zWideFilename; - - nChar = MultiByteToWideChar(CP_UTF8, 0, zFilename, -1, NULL, 0); - zWideFilename = malloc( nChar*sizeof(zWideFilename[0]) ); - if( zWideFilename==0 ){ - return 0; - } - nChar = MultiByteToWideChar(CP_UTF8, 0, zFilename, -1, zWideFilename, nChar); - if( nChar==0 ){ - free(zWideFilename); - zWideFilename = 0; - } - return zWideFilename; -} - -/* -** Convert microsoft unicode to UTF-8. Space to hold the returned string is -** obtained from malloc(). -*/ -static char *unicodeToUtf8(const WCHAR *zWideFilename){ - int nByte; - char *zFilename; - - nByte = WideCharToMultiByte(CP_UTF8, 0, zWideFilename, -1, 0, 0, 0, 0); - zFilename = malloc( nByte ); - if( zFilename==0 ){ - return 0; - } - nByte = WideCharToMultiByte(CP_UTF8, 0, zWideFilename, -1, zFilename, nByte, - 0, 0); - if( nByte == 0 ){ - free(zFilename); - zFilename = 0; - } - return zFilename; -} - -/* -** Convert an ansi string to microsoft unicode, based on the -** current codepage settings for file apis. -** -** Space to hold the returned string is obtained -** from malloc. -*/ -static WCHAR *mbcsToUnicode(const char *zFilename){ - int nByte; - WCHAR *zMbcsFilename; - int codepage = AreFileApisANSI() ? CP_ACP : CP_OEMCP; - - nByte = MultiByteToWideChar(codepage, 0, zFilename, -1, NULL,0)*sizeof(WCHAR); - zMbcsFilename = malloc( nByte*sizeof(zMbcsFilename[0]) ); - if( zMbcsFilename==0 ){ - return 0; - } - nByte = MultiByteToWideChar(codepage, 0, zFilename, -1, zMbcsFilename, nByte); - if( nByte==0 ){ - free(zMbcsFilename); - zMbcsFilename = 0; - } - return zMbcsFilename; -} - -/* -** Convert microsoft unicode to multibyte character string, based on the -** user's Ansi codepage. -** -** Space to hold the returned string is obtained from -** malloc(). -*/ -static char *unicodeToMbcs(const WCHAR *zWideFilename){ - int nByte; - char *zFilename; - int codepage = AreFileApisANSI() ? CP_ACP : CP_OEMCP; - - nByte = WideCharToMultiByte(codepage, 0, zWideFilename, -1, 0, 0, 0, 0); - zFilename = malloc( nByte ); - if( zFilename==0 ){ - return 0; - } - nByte = WideCharToMultiByte(codepage, 0, zWideFilename, -1, zFilename, nByte, - 0, 0); - if( nByte == 0 ){ - free(zFilename); - zFilename = 0; - } - return zFilename; -} - -/* -** Convert multibyte character string to UTF-8. Space to hold the -** returned string is obtained from malloc(). -*/ -static char *mbcsToUtf8(const char *zFilename){ - char *zFilenameUtf8; - WCHAR *zTmpWide; - - zTmpWide = mbcsToUnicode(zFilename); - if( zTmpWide==0 ){ - return 0; - } - zFilenameUtf8 = unicodeToUtf8(zTmpWide); - free(zTmpWide); - return zFilenameUtf8; -} - -/* -** Convert UTF-8 to multibyte character string. Space to hold the -** returned string is obtained from malloc(). -*/ -static char *utf8ToMbcs(const char *zFilename){ - char *zFilenameMbcs; - WCHAR *zTmpWide; - - zTmpWide = utf8ToUnicode(zFilename); - if( zTmpWide==0 ){ - return 0; - } - zFilenameMbcs = unicodeToMbcs(zTmpWide); - free(zTmpWide); - return zFilenameMbcs; -} - -#if OS_WINCE -/************************************************************************* -** This section contains code for WinCE only. -*/ -/* -** WindowsCE does not have a localtime() function. So create a -** substitute. -*/ -#include -struct tm *__cdecl localtime(const time_t *t) -{ - static struct tm y; - FILETIME uTm, lTm; - SYSTEMTIME pTm; - sqlite3_int64 t64; - t64 = *t; - t64 = (t64 + 11644473600)*10000000; - uTm.dwLowDateTime = t64 & 0xFFFFFFFF; - uTm.dwHighDateTime= t64 >> 32; - FileTimeToLocalFileTime(&uTm,&lTm); - FileTimeToSystemTime(&lTm,&pTm); - y.tm_year = pTm.wYear - 1900; - y.tm_mon = pTm.wMonth - 1; - y.tm_wday = pTm.wDayOfWeek; - y.tm_mday = pTm.wDay; - y.tm_hour = pTm.wHour; - y.tm_min = pTm.wMinute; - y.tm_sec = pTm.wSecond; - return &y; -} - -/* This will never be called, but defined to make the code compile */ -#define GetTempPathA(a,b) - -#define LockFile(a,b,c,d,e) winceLockFile(&a, b, c, d, e) -#define UnlockFile(a,b,c,d,e) winceUnlockFile(&a, b, c, d, e) -#define LockFileEx(a,b,c,d,e,f) winceLockFileEx(&a, b, c, d, e, f) - -#define HANDLE_TO_WINFILE(a) (winFile*)&((char*)a)[-offsetof(winFile,h)] - -/* -** Acquire a lock on the handle h -*/ -static void winceMutexAcquire(HANDLE h){ - DWORD dwErr; - do { - dwErr = WaitForSingleObject(h, INFINITE); - } while (dwErr != WAIT_OBJECT_0 && dwErr != WAIT_ABANDONED); -} -/* -** Release a lock acquired by winceMutexAcquire() -*/ -#define winceMutexRelease(h) ReleaseMutex(h) - -/* -** Create the mutex and shared memory used for locking in the file -** descriptor pFile -*/ -static BOOL winceCreateLock(const char *zFilename, winFile *pFile){ - WCHAR *zTok; - WCHAR *zName = utf8ToUnicode(zFilename); - BOOL bInit = TRUE; - - /* Initialize the local lockdata */ - ZeroMemory(&pFile->local, sizeof(pFile->local)); - - /* Replace the backslashes from the filename and lowercase it - ** to derive a mutex name. */ - zTok = CharLowerW(zName); - for (;*zTok;zTok++){ - if (*zTok == '\\') *zTok = '_'; - } - - /* Create/open the named mutex */ - pFile->hMutex = CreateMutexW(NULL, FALSE, zName); - if (!pFile->hMutex){ - free(zName); - return FALSE; - } - - /* Acquire the mutex before continuing */ - winceMutexAcquire(pFile->hMutex); - - /* Since the names of named mutexes, semaphores, file mappings etc are - ** case-sensitive, take advantage of that by uppercasing the mutex name - ** and using that as the shared filemapping name. - */ - CharUpperW(zName); - pFile->hShared = CreateFileMappingW(INVALID_HANDLE_VALUE, NULL, - PAGE_READWRITE, 0, sizeof(winceLock), - zName); - - /* Set a flag that indicates we're the first to create the memory so it - ** must be zero-initialized */ - if (GetLastError() == ERROR_ALREADY_EXISTS){ - bInit = FALSE; - } - - free(zName); - - /* If we succeeded in making the shared memory handle, map it. */ - if (pFile->hShared){ - pFile->shared = (winceLock*)MapViewOfFile(pFile->hShared, - FILE_MAP_READ|FILE_MAP_WRITE, 0, 0, sizeof(winceLock)); - /* If mapping failed, close the shared memory handle and erase it */ - if (!pFile->shared){ - CloseHandle(pFile->hShared); - pFile->hShared = NULL; - } - } - - /* If shared memory could not be created, then close the mutex and fail */ - if (pFile->hShared == NULL){ - winceMutexRelease(pFile->hMutex); - CloseHandle(pFile->hMutex); - pFile->hMutex = NULL; - return FALSE; - } - - /* Initialize the shared memory if we're supposed to */ - if (bInit) { - ZeroMemory(pFile->shared, sizeof(winceLock)); - } - - winceMutexRelease(pFile->hMutex); - return TRUE; -} - -/* -** Destroy the part of winFile that deals with wince locks -*/ -static void winceDestroyLock(winFile *pFile){ - if (pFile->hMutex){ - /* Acquire the mutex */ - winceMutexAcquire(pFile->hMutex); - - /* The following blocks should probably assert in debug mode, but they - are to cleanup in case any locks remained open */ - if (pFile->local.nReaders){ - pFile->shared->nReaders --; - } - if (pFile->local.bReserved){ - pFile->shared->bReserved = FALSE; - } - if (pFile->local.bPending){ - pFile->shared->bPending = FALSE; - } - if (pFile->local.bExclusive){ - pFile->shared->bExclusive = FALSE; - } - - /* De-reference and close our copy of the shared memory handle */ - UnmapViewOfFile(pFile->shared); - CloseHandle(pFile->hShared); - - if( pFile->zDeleteOnClose ){ - DeleteFileW(pFile->zDeleteOnClose); - free(pFile->zDeleteOnClose); - pFile->zDeleteOnClose = 0; - } - - /* Done with the mutex */ - winceMutexRelease(pFile->hMutex); - CloseHandle(pFile->hMutex); - pFile->hMutex = NULL; - } -} - -/* -** An implementation of the LockFile() API of windows for wince -*/ -static BOOL winceLockFile( - HANDLE *phFile, - DWORD dwFileOffsetLow, - DWORD dwFileOffsetHigh, - DWORD nNumberOfBytesToLockLow, - DWORD nNumberOfBytesToLockHigh -){ - winFile *pFile = HANDLE_TO_WINFILE(phFile); - BOOL bReturn = FALSE; - - if (!pFile->hMutex) return TRUE; - winceMutexAcquire(pFile->hMutex); - - /* Wanting an exclusive lock? */ - if (dwFileOffsetLow == SHARED_FIRST - && nNumberOfBytesToLockLow == SHARED_SIZE){ - if (pFile->shared->nReaders == 0 && pFile->shared->bExclusive == 0){ - pFile->shared->bExclusive = TRUE; - pFile->local.bExclusive = TRUE; - bReturn = TRUE; - } - } - - /* Want a read-only lock? */ - else if ((dwFileOffsetLow >= SHARED_FIRST && - dwFileOffsetLow < SHARED_FIRST + SHARED_SIZE) && - nNumberOfBytesToLockLow == 1){ - if (pFile->shared->bExclusive == 0){ - pFile->local.nReaders ++; - if (pFile->local.nReaders == 1){ - pFile->shared->nReaders ++; - } - bReturn = TRUE; - } - } - - /* Want a pending lock? */ - else if (dwFileOffsetLow == PENDING_BYTE && nNumberOfBytesToLockLow == 1){ - /* If no pending lock has been acquired, then acquire it */ - if (pFile->shared->bPending == 0) { - pFile->shared->bPending = TRUE; - pFile->local.bPending = TRUE; - bReturn = TRUE; - } - } - /* Want a reserved lock? */ - else if (dwFileOffsetLow == RESERVED_BYTE && nNumberOfBytesToLockLow == 1){ - if (pFile->shared->bReserved == 0) { - pFile->shared->bReserved = TRUE; - pFile->local.bReserved = TRUE; - bReturn = TRUE; - } - } - - winceMutexRelease(pFile->hMutex); - return bReturn; -} - -/* -** An implementation of the UnlockFile API of windows for wince -*/ -static BOOL winceUnlockFile( - HANDLE *phFile, - DWORD dwFileOffsetLow, - DWORD dwFileOffsetHigh, - DWORD nNumberOfBytesToUnlockLow, - DWORD nNumberOfBytesToUnlockHigh -){ - winFile *pFile = HANDLE_TO_WINFILE(phFile); - BOOL bReturn = FALSE; - - if (!pFile->hMutex) return TRUE; - winceMutexAcquire(pFile->hMutex); - - /* Releasing a reader lock or an exclusive lock */ - if (dwFileOffsetLow >= SHARED_FIRST && - dwFileOffsetLow < SHARED_FIRST + SHARED_SIZE){ - /* Did we have an exclusive lock? */ - if (pFile->local.bExclusive){ - pFile->local.bExclusive = FALSE; - pFile->shared->bExclusive = FALSE; - bReturn = TRUE; - } - - /* Did we just have a reader lock? */ - else if (pFile->local.nReaders){ - pFile->local.nReaders --; - if (pFile->local.nReaders == 0) - { - pFile->shared->nReaders --; - } - bReturn = TRUE; - } - } - - /* Releasing a pending lock */ - else if (dwFileOffsetLow == PENDING_BYTE && nNumberOfBytesToUnlockLow == 1){ - if (pFile->local.bPending){ - pFile->local.bPending = FALSE; - pFile->shared->bPending = FALSE; - bReturn = TRUE; - } - } - /* Releasing a reserved lock */ - else if (dwFileOffsetLow == RESERVED_BYTE && nNumberOfBytesToUnlockLow == 1){ - if (pFile->local.bReserved) { - pFile->local.bReserved = FALSE; - pFile->shared->bReserved = FALSE; - bReturn = TRUE; - } - } - - winceMutexRelease(pFile->hMutex); - return bReturn; -} - -/* -** An implementation of the LockFileEx() API of windows for wince -*/ -static BOOL winceLockFileEx( - HANDLE *phFile, - DWORD dwFlags, - DWORD dwReserved, - DWORD nNumberOfBytesToLockLow, - DWORD nNumberOfBytesToLockHigh, - LPOVERLAPPED lpOverlapped -){ - /* If the caller wants a shared read lock, forward this call - ** to winceLockFile */ - if (lpOverlapped->Offset == SHARED_FIRST && - dwFlags == 1 && - nNumberOfBytesToLockLow == SHARED_SIZE){ - return winceLockFile(phFile, SHARED_FIRST, 0, 1, 0); - } - return FALSE; -} -/* -** End of the special code for wince -*****************************************************************************/ -#endif /* OS_WINCE */ - -/***************************************************************************** -** The next group of routines implement the I/O methods specified -** by the sqlite3_io_methods object. -******************************************************************************/ - -/* -** Close a file. -** -** It is reported that an attempt to close a handle might sometimes -** fail. This is a very unreasonable result, but windows is notorious -** for being unreasonable so I do not doubt that it might happen. If -** the close fails, we pause for 100 milliseconds and try again. As -** many as MX_CLOSE_ATTEMPT attempts to close the handle are made before -** giving up and returning an error. -*/ -#define MX_CLOSE_ATTEMPT 3 -static int winClose(sqlite3_file *id){ - int rc, cnt = 0; - winFile *pFile = (winFile*)id; - OSTRACE2("CLOSE %d\n", pFile->h); - do{ - rc = CloseHandle(pFile->h); - }while( rc==0 && cnt++ < MX_CLOSE_ATTEMPT && (Sleep(100), 1) ); -#if OS_WINCE - winceDestroyLock(pFile); -#endif - OpenCounter(-1); - return rc ? SQLITE_OK : SQLITE_IOERR; -} - -/* -** Some microsoft compilers lack this definition. -*/ -#ifndef INVALID_SET_FILE_POINTER -# define INVALID_SET_FILE_POINTER ((DWORD)-1) -#endif - -/* -** Read data from a file into a buffer. Return SQLITE_OK if all -** bytes were read successfully and SQLITE_IOERR if anything goes -** wrong. -*/ -static int winRead( - sqlite3_file *id, /* File to read from */ - void *pBuf, /* Write content into this buffer */ - int amt, /* Number of bytes to read */ - sqlite3_int64 offset /* Begin reading at this offset */ -){ - LONG upperBits = (offset>>32) & 0x7fffffff; - LONG lowerBits = offset & 0xffffffff; - DWORD rc; - DWORD got; - winFile *pFile = (winFile*)id; - assert( id!=0 ); - SimulateIOError(return SQLITE_IOERR_READ); - OSTRACE3("READ %d lock=%d\n", pFile->h, pFile->locktype); - rc = SetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN); - if( rc==INVALID_SET_FILE_POINTER && GetLastError()!=NO_ERROR ){ - return SQLITE_FULL; - } - if( !ReadFile(pFile->h, pBuf, amt, &got, 0) ){ - return SQLITE_IOERR_READ; - } - if( got==(DWORD)amt ){ - return SQLITE_OK; - }else{ - memset(&((char*)pBuf)[got], 0, amt-got); - return SQLITE_IOERR_SHORT_READ; - } -} - -/* -** Write data from a buffer into a file. Return SQLITE_OK on success -** or some other error code on failure. -*/ -static int winWrite( - sqlite3_file *id, /* File to write into */ - const void *pBuf, /* The bytes to be written */ - int amt, /* Number of bytes to write */ - sqlite3_int64 offset /* Offset into the file to begin writing at */ -){ - LONG upperBits = (offset>>32) & 0x7fffffff; - LONG lowerBits = offset & 0xffffffff; - DWORD rc; - DWORD wrote; - winFile *pFile = (winFile*)id; - assert( id!=0 ); - SimulateIOError(return SQLITE_IOERR_WRITE); - SimulateDiskfullError(return SQLITE_FULL); - OSTRACE3("WRITE %d lock=%d\n", pFile->h, pFile->locktype); - rc = SetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN); - if( rc==INVALID_SET_FILE_POINTER && GetLastError()!=NO_ERROR ){ - return SQLITE_FULL; - } - assert( amt>0 ); - while( - amt>0 - && (rc = WriteFile(pFile->h, pBuf, amt, &wrote, 0))!=0 - && wrote>0 - ){ - amt -= wrote; - pBuf = &((char*)pBuf)[wrote]; - } - if( !rc || amt>(int)wrote ){ - return SQLITE_FULL; - } - return SQLITE_OK; -} - -/* -** Truncate an open file to a specified size -*/ -static int winTruncate(sqlite3_file *id, sqlite3_int64 nByte){ - LONG upperBits = (nByte>>32) & 0x7fffffff; - LONG lowerBits = nByte & 0xffffffff; - winFile *pFile = (winFile*)id; - OSTRACE3("TRUNCATE %d %lld\n", pFile->h, nByte); - SimulateIOError(return SQLITE_IOERR_TRUNCATE); - SetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN); - SetEndOfFile(pFile->h); - return SQLITE_OK; -} - -#ifdef SQLITE_TEST -/* -** Count the number of fullsyncs and normal syncs. This is used to test -** that syncs and fullsyncs are occuring at the right times. -*/ -int sqlite3_sync_count = 0; -int sqlite3_fullsync_count = 0; -#endif - -/* -** Make sure all writes to a particular file are committed to disk. -*/ -static int winSync(sqlite3_file *id, int flags){ - winFile *pFile = (winFile*)id; - OSTRACE3("SYNC %d lock=%d\n", pFile->h, pFile->locktype); -#ifdef SQLITE_TEST - if( flags & SQLITE_SYNC_FULL ){ - sqlite3_fullsync_count++; - } - sqlite3_sync_count++; -#endif - if( FlushFileBuffers(pFile->h) ){ - return SQLITE_OK; - }else{ - return SQLITE_IOERR; - } -} - -/* -** Determine the current size of a file in bytes -*/ -static int winFileSize(sqlite3_file *id, sqlite3_int64 *pSize){ - winFile *pFile = (winFile*)id; - DWORD upperBits, lowerBits; - SimulateIOError(return SQLITE_IOERR_FSTAT); - lowerBits = GetFileSize(pFile->h, &upperBits); - *pSize = (((sqlite3_int64)upperBits)<<32) + lowerBits; - return SQLITE_OK; -} - -/* -** LOCKFILE_FAIL_IMMEDIATELY is undefined on some Windows systems. -*/ -#ifndef LOCKFILE_FAIL_IMMEDIATELY -# define LOCKFILE_FAIL_IMMEDIATELY 1 -#endif - -/* -** Acquire a reader lock. -** Different API routines are called depending on whether or not this -** is Win95 or WinNT. -*/ -static int getReadLock(winFile *pFile){ - int res; - if( isNT() ){ - OVERLAPPED ovlp; - ovlp.Offset = SHARED_FIRST; - ovlp.OffsetHigh = 0; - ovlp.hEvent = 0; - res = LockFileEx(pFile->h, LOCKFILE_FAIL_IMMEDIATELY, - 0, SHARED_SIZE, 0, &ovlp); - }else{ - int lk; - sqlite3Randomness(sizeof(lk), &lk); - pFile->sharedLockByte = (lk & 0x7fffffff)%(SHARED_SIZE - 1); - res = LockFile(pFile->h, SHARED_FIRST+pFile->sharedLockByte, 0, 1, 0); - } - return res; -} - -/* -** Undo a readlock -*/ -static int unlockReadLock(winFile *pFile){ - int res; - if( isNT() ){ - res = UnlockFile(pFile->h, SHARED_FIRST, 0, SHARED_SIZE, 0); - }else{ - res = UnlockFile(pFile->h, SHARED_FIRST + pFile->sharedLockByte, 0, 1, 0); - } - return res; -} - -/* -** Lock the file with the lock specified by parameter locktype - one -** of the following: -** -** (1) SHARED_LOCK -** (2) RESERVED_LOCK -** (3) PENDING_LOCK -** (4) EXCLUSIVE_LOCK -** -** Sometimes when requesting one lock state, additional lock states -** are inserted in between. The locking might fail on one of the later -** transitions leaving the lock state different from what it started but -** still short of its goal. The following chart shows the allowed -** transitions and the inserted intermediate states: -** -** UNLOCKED -> SHARED -** SHARED -> RESERVED -** SHARED -> (PENDING) -> EXCLUSIVE -** RESERVED -> (PENDING) -> EXCLUSIVE -** PENDING -> EXCLUSIVE -** -** This routine will only increase a lock. The winUnlock() routine -** erases all locks at once and returns us immediately to locking level 0. -** It is not possible to lower the locking level one step at a time. You -** must go straight to locking level 0. -*/ -static int winLock(sqlite3_file *id, int locktype){ - int rc = SQLITE_OK; /* Return code from subroutines */ - int res = 1; /* Result of a windows lock call */ - int newLocktype; /* Set pFile->locktype to this value before exiting */ - int gotPendingLock = 0;/* True if we acquired a PENDING lock this time */ - winFile *pFile = (winFile*)id; - - assert( pFile!=0 ); - OSTRACE5("LOCK %d %d was %d(%d)\n", - pFile->h, locktype, pFile->locktype, pFile->sharedLockByte); - - /* If there is already a lock of this type or more restrictive on the - ** OsFile, do nothing. Don't use the end_lock: exit path, as - ** sqlite3OsEnterMutex() hasn't been called yet. - */ - if( pFile->locktype>=locktype ){ - return SQLITE_OK; - } - - /* Make sure the locking sequence is correct - */ - assert( pFile->locktype!=NO_LOCK || locktype==SHARED_LOCK ); - assert( locktype!=PENDING_LOCK ); - assert( locktype!=RESERVED_LOCK || pFile->locktype==SHARED_LOCK ); - - /* Lock the PENDING_LOCK byte if we need to acquire a PENDING lock or - ** a SHARED lock. If we are acquiring a SHARED lock, the acquisition of - ** the PENDING_LOCK byte is temporary. - */ - newLocktype = pFile->locktype; - if( pFile->locktype==NO_LOCK - || (locktype==EXCLUSIVE_LOCK && pFile->locktype==RESERVED_LOCK) - ){ - int cnt = 3; - while( cnt-->0 && (res = LockFile(pFile->h, PENDING_BYTE, 0, 1, 0))==0 ){ - /* Try 3 times to get the pending lock. The pending lock might be - ** held by another reader process who will release it momentarily. - */ - OSTRACE2("could not get a PENDING lock. cnt=%d\n", cnt); - Sleep(1); - } - gotPendingLock = res; - } - - /* Acquire a shared lock - */ - if( locktype==SHARED_LOCK && res ){ - assert( pFile->locktype==NO_LOCK ); - res = getReadLock(pFile); - if( res ){ - newLocktype = SHARED_LOCK; - } - } - - /* Acquire a RESERVED lock - */ - if( locktype==RESERVED_LOCK && res ){ - assert( pFile->locktype==SHARED_LOCK ); - res = LockFile(pFile->h, RESERVED_BYTE, 0, 1, 0); - if( res ){ - newLocktype = RESERVED_LOCK; - } - } - - /* Acquire a PENDING lock - */ - if( locktype==EXCLUSIVE_LOCK && res ){ - newLocktype = PENDING_LOCK; - gotPendingLock = 0; - } - - /* Acquire an EXCLUSIVE lock - */ - if( locktype==EXCLUSIVE_LOCK && res ){ - assert( pFile->locktype>=SHARED_LOCK ); - res = unlockReadLock(pFile); - OSTRACE2("unreadlock = %d\n", res); - res = LockFile(pFile->h, SHARED_FIRST, 0, SHARED_SIZE, 0); - if( res ){ - newLocktype = EXCLUSIVE_LOCK; - }else{ - OSTRACE2("error-code = %d\n", GetLastError()); - getReadLock(pFile); - } - } - - /* If we are holding a PENDING lock that ought to be released, then - ** release it now. - */ - if( gotPendingLock && locktype==SHARED_LOCK ){ - UnlockFile(pFile->h, PENDING_BYTE, 0, 1, 0); - } - - /* Update the state of the lock has held in the file descriptor then - ** return the appropriate result code. - */ - if( res ){ - rc = SQLITE_OK; - }else{ - OSTRACE4("LOCK FAILED %d trying for %d but got %d\n", pFile->h, - locktype, newLocktype); - rc = SQLITE_BUSY; - } - pFile->locktype = newLocktype; - return rc; -} - -/* -** This routine checks if there is a RESERVED lock held on the specified -** file by this or any other process. If such a lock is held, return -** non-zero, otherwise zero. -*/ -static int winCheckReservedLock(sqlite3_file *id){ - int rc; - winFile *pFile = (winFile*)id; - assert( pFile!=0 ); - if( pFile->locktype>=RESERVED_LOCK ){ - rc = 1; - OSTRACE3("TEST WR-LOCK %d %d (local)\n", pFile->h, rc); - }else{ - rc = LockFile(pFile->h, RESERVED_BYTE, 0, 1, 0); - if( rc ){ - UnlockFile(pFile->h, RESERVED_BYTE, 0, 1, 0); - } - rc = !rc; - OSTRACE3("TEST WR-LOCK %d %d (remote)\n", pFile->h, rc); - } - return rc; -} - -/* -** Lower the locking level on file descriptor id to locktype. locktype -** must be either NO_LOCK or SHARED_LOCK. -** -** If the locking level of the file descriptor is already at or below -** the requested locking level, this routine is a no-op. -** -** It is not possible for this routine to fail if the second argument -** is NO_LOCK. If the second argument is SHARED_LOCK then this routine -** might return SQLITE_IOERR; -*/ -static int winUnlock(sqlite3_file *id, int locktype){ - int type; - winFile *pFile = (winFile*)id; - int rc = SQLITE_OK; - assert( pFile!=0 ); - assert( locktype<=SHARED_LOCK ); - OSTRACE5("UNLOCK %d to %d was %d(%d)\n", pFile->h, locktype, - pFile->locktype, pFile->sharedLockByte); - type = pFile->locktype; - if( type>=EXCLUSIVE_LOCK ){ - UnlockFile(pFile->h, SHARED_FIRST, 0, SHARED_SIZE, 0); - if( locktype==SHARED_LOCK && !getReadLock(pFile) ){ - /* This should never happen. We should always be able to - ** reacquire the read lock */ - rc = SQLITE_IOERR_UNLOCK; - } - } - if( type>=RESERVED_LOCK ){ - UnlockFile(pFile->h, RESERVED_BYTE, 0, 1, 0); - } - if( locktype==NO_LOCK && type>=SHARED_LOCK ){ - unlockReadLock(pFile); - } - if( type>=PENDING_LOCK ){ - UnlockFile(pFile->h, PENDING_BYTE, 0, 1, 0); - } - pFile->locktype = locktype; - return rc; -} - -/* -** Control and query of the open file handle. -*/ -static int winFileControl(sqlite3_file *id, int op, void *pArg){ - switch( op ){ - case SQLITE_FCNTL_LOCKSTATE: { - *(int*)pArg = ((winFile*)id)->locktype; - return SQLITE_OK; - } - } - return SQLITE_ERROR; -} - -/* -** Return the sector size in bytes of the underlying block device for -** the specified file. This is almost always 512 bytes, but may be -** larger for some devices. -** -** SQLite code assumes this function cannot fail. It also assumes that -** if two files are created in the same file-system directory (i.e. -** a database and it's journal file) that the sector size will be the -** same for both. -*/ -static int winSectorSize(sqlite3_file *id){ - return SQLITE_DEFAULT_SECTOR_SIZE; -} - -/* -** Return a vector of device characteristics. -*/ -static int winDeviceCharacteristics(sqlite3_file *id){ - return 0; -} - -/* -** This vector defines all the methods that can operate on an -** sqlite3_file for win32. -*/ -static const sqlite3_io_methods winIoMethod = { - 1, /* iVersion */ - winClose, - winRead, - winWrite, - winTruncate, - winSync, - winFileSize, - winLock, - winUnlock, - winCheckReservedLock, - winFileControl, - winSectorSize, - winDeviceCharacteristics -}; - -/*************************************************************************** -** Here ends the I/O methods that form the sqlite3_io_methods object. -** -** The next block of code implements the VFS methods. -****************************************************************************/ - -/* -** Convert a UTF-8 filename into whatever form the underlying -** operating system wants filenames in. Space to hold the result -** is obtained from malloc and must be freed by the calling -** function. -*/ -static void *convertUtf8Filename(const char *zFilename){ - void *zConverted = 0; - if( isNT() ){ - zConverted = utf8ToUnicode(zFilename); - }else{ - zConverted = utf8ToMbcs(zFilename); - } - /* caller will handle out of memory */ - return zConverted; -} - -/* -** Open a file. -*/ -static int winOpen( - sqlite3_vfs *pVfs, /* Not used */ - const char *zName, /* Name of the file (UTF-8) */ - sqlite3_file *id, /* Write the SQLite file handle here */ - int flags, /* Open mode flags */ - int *pOutFlags /* Status return flags */ -){ - HANDLE h; - DWORD dwDesiredAccess; - DWORD dwShareMode; - DWORD dwCreationDisposition; - DWORD dwFlagsAndAttributes = 0; - winFile *pFile = (winFile*)id; - void *zConverted = convertUtf8Filename(zName); - if( zConverted==0 ){ - return SQLITE_NOMEM; - } - - if( flags & SQLITE_OPEN_READWRITE ){ - dwDesiredAccess = GENERIC_READ | GENERIC_WRITE; - }else{ - dwDesiredAccess = GENERIC_READ; - } - if( flags & SQLITE_OPEN_CREATE ){ - dwCreationDisposition = OPEN_ALWAYS; - }else{ - dwCreationDisposition = OPEN_EXISTING; - } - if( flags & SQLITE_OPEN_MAIN_DB ){ - dwShareMode = FILE_SHARE_READ | FILE_SHARE_WRITE; - }else{ - dwShareMode = 0; - } - if( flags & (SQLITE_OPEN_TEMP_DB | SQLITE_OPEN_TEMP_JOURNAL - | SQLITE_OPEN_SUBJOURNAL) ){ - dwFlagsAndAttributes = FILE_ATTRIBUTE_TEMPORARY - | FILE_ATTRIBUTE_HIDDEN - | FILE_FLAG_DELETE_ON_CLOSE; - }else{ - dwFlagsAndAttributes = FILE_ATTRIBUTE_NORMAL; - } - if( flags & (SQLITE_OPEN_MAIN_DB | SQLITE_OPEN_TEMP_DB) ){ - dwFlagsAndAttributes |= FILE_FLAG_RANDOM_ACCESS; - }else{ - dwFlagsAndAttributes |= FILE_FLAG_SEQUENTIAL_SCAN; - } - if( isNT() ){ - h = CreateFileW((WCHAR*)zConverted, - dwDesiredAccess, - dwShareMode, - NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL - ); - }else{ -#if OS_WINCE - return SQLITE_NOMEM; -#else - h = CreateFileA((char*)zConverted, - dwDesiredAccess, - dwShareMode, - NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL - ); -#endif - } - if( h==INVALID_HANDLE_VALUE ){ - free(zConverted); - if( flags & SQLITE_OPEN_READWRITE ){ - return winOpen(0, zName, id, - ((flags|SQLITE_OPEN_READONLY)&~SQLITE_OPEN_READWRITE), pOutFlags); - }else{ - return SQLITE_CANTOPEN; - } - } - if( pOutFlags ){ - if( flags & SQLITE_OPEN_READWRITE ){ - *pOutFlags = SQLITE_OPEN_READWRITE; - }else{ - *pOutFlags = SQLITE_OPEN_READONLY; - } - } - memset(pFile, 0, sizeof(*pFile)); - pFile->pMethod = &winIoMethod; - pFile->h = h; -#if OS_WINCE - if( (flags & (SQLITE_OPEN_READWRITE|SQLITE_OPEN_MAIN_DB)) == - (SQLITE_OPEN_READWRITE|SQLITE_OPEN_MAIN_DB) - && !winceCreateLock(zFilename, pFile) - ){ - CloseHandle(h); - free(zConverted); - return SQLITE_CANTOPEN; - } - if( dwFlagsAndAttributes & FILE_FLAG_DELETE_ON_CLOSE ){ - pFile->zDeleteOnClose = zConverted; - }else -#endif - { - free(zConverted); - } - OpenCounter(+1); - return SQLITE_OK; -} - -/* -** Delete the named file. -** -** Note that windows does not allow a file to be deleted if some other -** process has it open. Sometimes a virus scanner or indexing program -** will open a journal file shortly after it is created in order to do -** whatever it is it does. While this other process is holding the -** file open, we will be unable to delete it. To work around this -** problem, we delay 100 milliseconds and try to delete again. Up -** to MX_DELETION_ATTEMPTs deletion attempts are run before giving -** up and returning an error. -*/ -#define MX_DELETION_ATTEMPTS 3 -static int winDelete( - sqlite3_vfs *pVfs, /* Not used on win32 */ - const char *zFilename, /* Name of file to delete */ - int syncDir /* Not used on win32 */ -){ - int cnt = 0; - int rc; - void *zConverted = convertUtf8Filename(zFilename); - if( zConverted==0 ){ - return SQLITE_NOMEM; - } - SimulateIOError(return SQLITE_IOERR_DELETE); - if( isNT() ){ - do{ - rc = DeleteFileW(zConverted); - }while( rc==0 && GetFileAttributesW(zConverted)!=0xffffffff - && cnt++ < MX_DELETION_ATTEMPTS && (Sleep(100), 1) ); - }else{ -#if OS_WINCE - return SQLITE_NOMEM; -#else - do{ - rc = DeleteFileA(zConverted); - }while( rc==0 && GetFileAttributesA(zConverted)!=0xffffffff - && cnt++ < MX_DELETION_ATTEMPTS && (Sleep(100), 1) ); -#endif - } - free(zConverted); - OSTRACE2("DELETE \"%s\"\n", zFilename); - return rc!=0 ? SQLITE_OK : SQLITE_IOERR; -} - -/* -** Check the existance and status of a file. -*/ -static int winAccess( - sqlite3_vfs *pVfs, /* Not used on win32 */ - const char *zFilename, /* Name of file to check */ - int flags /* Type of test to make on this file */ -){ - DWORD attr; - int rc; - void *zConverted = convertUtf8Filename(zFilename); - if( zConverted==0 ){ - return SQLITE_NOMEM; - } - if( isNT() ){ - attr = GetFileAttributesW((WCHAR*)zConverted); - }else{ -#if OS_WINCE - return SQLITE_NOMEM; -#else - attr = GetFileAttributesA((char*)zConverted); -#endif - } - free(zConverted); - switch( flags ){ - case SQLITE_ACCESS_READ: - case SQLITE_ACCESS_EXISTS: - rc = attr!=0xffffffff; - break; - case SQLITE_ACCESS_READWRITE: - rc = (attr & FILE_ATTRIBUTE_READONLY)==0; - break; - default: - assert(!"Invalid flags argument"); - } - return rc; -} - - -/* -** Create a temporary file name in zBuf. zBuf must be big enough to -** hold at pVfs->mxPathname characters. -*/ -static int winGetTempname(sqlite3_vfs *pVfs, int nBuf, char *zBuf){ - static char zChars[] = - "abcdefghijklmnopqrstuvwxyz" - "ABCDEFGHIJKLMNOPQRSTUVWXYZ" - "0123456789"; - int i, j; - char zTempPath[MAX_PATH+1]; - if( sqlite3_temp_directory ){ - sqlite3_snprintf(MAX_PATH-30, zTempPath, "%s", sqlite3_temp_directory); - }else if( isNT() ){ - char *zMulti; - WCHAR zWidePath[MAX_PATH]; - GetTempPathW(MAX_PATH-30, zWidePath); - zMulti = unicodeToUtf8(zWidePath); - if( zMulti ){ - sqlite3_snprintf(MAX_PATH-30, zTempPath, "%s", zMulti); - free(zMulti); - }else{ - return SQLITE_NOMEM; - } - }else{ - char *zUtf8; - char zMbcsPath[MAX_PATH]; - GetTempPathA(MAX_PATH-30, zMbcsPath); - zUtf8 = mbcsToUtf8(zMbcsPath); - if( zUtf8 ){ - sqlite3_snprintf(MAX_PATH-30, zTempPath, "%s", zUtf8); - free(zUtf8); - }else{ - return SQLITE_NOMEM; - } - } - for(i=strlen(zTempPath); i>0 && zTempPath[i-1]=='\\'; i--){} - zTempPath[i] = 0; - sqlite3_snprintf(pVfs->mxPathname-30, zBuf, - "%s\\"SQLITE_TEMP_FILE_PREFIX, zTempPath); - j = strlen(zBuf); - sqlite3Randomness(20, &zBuf[j]); - for(i=0; i<20; i++, j++){ - zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ]; - } - zBuf[j] = 0; - OSTRACE2("TEMP FILENAME: %s\n", zBuf); - return SQLITE_OK; -} - -/* -** Turn a relative pathname into a full pathname. Write the full -** pathname into zOut[]. zOut[] will be at least pVfs->mxPathname -** bytes in size. -*/ -static int winFullPathname( - sqlite3_vfs *pVfs, /* Pointer to vfs object */ - const char *zRelative, /* Possibly relative input path */ - int nFull, /* Size of output buffer in bytes */ - char *zFull /* Output buffer */ -){ - -#if defined(__CYGWIN__) - cygwin_conv_to_full_win32_path(zRelative, zFull); - return SQLITE_OK; -#endif - -#if OS_WINCE - /* WinCE has no concept of a relative pathname, or so I am told. */ - sqlite3_snprintf(pVfs->mxPathname, zFull, "%s", zRelative); -#endif - -#if !OS_WINCE && !defined(__CYGWIN__) - int nByte; - void *zConverted; - char *zOut; - zConverted = convertUtf8Filename(zRelative); - if( isNT() ){ - WCHAR *zTemp; - nByte = GetFullPathNameW((WCHAR*)zConverted, 0, 0, 0) + 3; - zTemp = malloc( nByte*sizeof(zTemp[0]) ); - if( zTemp==0 ){ - free(zConverted); - return SQLITE_NOMEM; - } - GetFullPathNameW((WCHAR*)zConverted, nByte, zTemp, 0); - free(zConverted); - zOut = unicodeToUtf8(zTemp); - free(zTemp); - }else{ - char *zTemp; - nByte = GetFullPathNameA((char*)zConverted, 0, 0, 0) + 3; - zTemp = malloc( nByte*sizeof(zTemp[0]) ); - if( zTemp==0 ){ - free(zConverted); - return SQLITE_NOMEM; - } - GetFullPathNameA((char*)zConverted, nByte, zTemp, 0); - free(zConverted); - zOut = mbcsToUtf8(zTemp); - free(zTemp); - } - if( zOut ){ - sqlite3_snprintf(pVfs->mxPathname, zFull, "%s", zOut); - free(zOut); - return SQLITE_OK; - }else{ - return SQLITE_NOMEM; - } -#endif -} - -#ifndef SQLITE_OMIT_LOAD_EXTENSION -/* -** Interfaces for opening a shared library, finding entry points -** within the shared library, and closing the shared library. -*/ -/* -** Interfaces for opening a shared library, finding entry points -** within the shared library, and closing the shared library. -*/ -static void *winDlOpen(sqlite3_vfs *pVfs, const char *zFilename){ - HANDLE h; - void *zConverted = convertUtf8Filename(zFilename); - if( zConverted==0 ){ - return 0; - } - if( isNT() ){ - h = LoadLibraryW((WCHAR*)zConverted); - }else{ -#if OS_WINCE - return 0; -#else - h = LoadLibraryA((char*)zConverted); -#endif - } - free(zConverted); - return (void*)h; -} -static void winDlError(sqlite3_vfs *pVfs, int nBuf, char *zBufOut){ - FormatMessage( - FORMAT_MESSAGE_FROM_SYSTEM, - NULL, - GetLastError(), - 0, - zBufOut, - nBuf-1, - 0 - ); -} -void *winDlSym(sqlite3_vfs *pVfs, void *pHandle, const char *zSymbol){ -#if OS_WINCE - /* The GetProcAddressA() routine is only available on wince. */ - return GetProcAddressA((HANDLE)pHandle, zSymbol); -#else - /* All other windows platforms expect GetProcAddress() to take - ** an Ansi string regardless of the _UNICODE setting */ - return GetProcAddress((HANDLE)pHandle, zSymbol); -#endif -} -void winDlClose(sqlite3_vfs *pVfs, void *pHandle){ - FreeLibrary((HANDLE)pHandle); -} -#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */ - #define winDlOpen 0 - #define winDlError 0 - #define winDlSym 0 - #define winDlClose 0 -#endif - - -/* -** Write up to nBuf bytes of randomness into zBuf. -*/ -static int winRandomness(sqlite3_vfs *pVfs, int nBuf, char *zBuf){ - int n = 0; - if( sizeof(SYSTEMTIME)<=nBuf-n ){ - SYSTEMTIME x; - GetSystemTime(&x); - memcpy(&zBuf[n], &x, sizeof(x)); - n += sizeof(x); - } - if( sizeof(DWORD)<=nBuf-n ){ - DWORD pid = GetCurrentProcessId(); - memcpy(&zBuf[n], &pid, sizeof(pid)); - n += sizeof(pid); - } - if( sizeof(DWORD)<=nBuf-n ){ - DWORD cnt = GetTickCount(); - memcpy(&zBuf[n], &cnt, sizeof(cnt)); - n += sizeof(cnt); - } - if( sizeof(LARGE_INTEGER)<=nBuf-n ){ - LARGE_INTEGER i; - QueryPerformanceCounter(&i); - memcpy(&zBuf[n], &i, sizeof(i)); - n += sizeof(i); - } - return n; -} - - -/* -** Sleep for a little while. Return the amount of time slept. -*/ -static int winSleep(sqlite3_vfs *pVfs, int microsec){ - Sleep((microsec+999)/1000); - return ((microsec+999)/1000)*1000; -} - -/* -** The following variable, if set to a non-zero value, becomes the result -** returned from sqlite3OsCurrentTime(). This is used for testing. -*/ -#ifdef SQLITE_TEST -int sqlite3_current_time = 0; -#endif - -/* -** Find the current time (in Universal Coordinated Time). Write the -** current time and date as a Julian Day number into *prNow and -** return 0. Return 1 if the time and date cannot be found. -*/ -int winCurrentTime(sqlite3_vfs *pVfs, double *prNow){ - FILETIME ft; - /* FILETIME structure is a 64-bit value representing the number of - 100-nanosecond intervals since January 1, 1601 (= JD 2305813.5). - */ - double now; -#if OS_WINCE - SYSTEMTIME time; - GetSystemTime(&time); - SystemTimeToFileTime(&time,&ft); -#else - GetSystemTimeAsFileTime( &ft ); -#endif - now = ((double)ft.dwHighDateTime) * 4294967296.0; - *prNow = (now + ft.dwLowDateTime)/864000000000.0 + 2305813.5; -#ifdef SQLITE_TEST - if( sqlite3_current_time ){ - *prNow = sqlite3_current_time/86400.0 + 2440587.5; - } -#endif - return 0; -} - - -/* -** Return a pointer to the sqlite3DefaultVfs structure. We use -** a function rather than give the structure global scope because -** some compilers (MSVC) do not allow forward declarations of -** initialized structures. -*/ -sqlite3_vfs *sqlite3OsDefaultVfs(void){ - static sqlite3_vfs winVfs = { - 1, /* iVersion */ - sizeof(winFile), /* szOsFile */ - MAX_PATH, /* mxPathname */ - 0, /* pNext */ - "win32", /* zName */ - 0, /* pAppData */ - - winOpen, /* xOpen */ - winDelete, /* xDelete */ - winAccess, /* xAccess */ - winGetTempname, /* xGetTempName */ - winFullPathname, /* xFullPathname */ - winDlOpen, /* xDlOpen */ - winDlError, /* xDlError */ - winDlSym, /* xDlSym */ - winDlClose, /* xDlClose */ - winRandomness, /* xRandomness */ - winSleep, /* xSleep */ - winCurrentTime /* xCurrentTime */ - }; - - return &winVfs; -} - -#endif /* OS_WIN */